[Histonet] Sakura film coverslipper xylene residue issue

[Karin Groeger]

Hi Scott,
  We place ours in front of a fan to dry if we are in a hurry, even if
we air dry them we do not have a problem with the xylene residue,
perhaps you have  a bad batch, check your lot # and call Sakura.  We
coverslip over 1,000 slides a day and have not seen this.

Karin Groeger

Histology Supervisor

US LABS, Irvine,CA

949-450-0145 ext. 649

-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu
[mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Scott
Sent: Thursday, May 28, 2009 10:03 PM
To: Histonet <@t> lists.utsouthwestern.edu
Subject: [Histonet] Sakura film coverslipper xylene residue issue

Hi,
    We have a newer Sakura film coverslipper, does anyone have
experience with this piece of equipment. I have a problem with the
slides having a light xylene residue, after the slides come off of the
coverslipper. 

How do you dry them? If I leave the slides on the coverslipper to air
dry the xylene residue is noticeable. If I lightly wipe off all of the
slides as they come off the coverslipper they look clean.

How do you guys do it? I think it is a waste of time to wipe off all of
the slides. I don't think the xylene flow is too high.

Thanks for your help,

Scott Hendricksen HT(ASCP)
_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet



Confidentiality Notice: This message, including any attachments, may contain CONFIDENTIAL AND/OR LEGALLY PRIVILEGED information. The information is intended for use by the individual named above and may not be disseminated to any other party without US LABS' written permission. If you are not the intended recipient, or the employee or agent responsible for delivering this information to the intended recipient, you are hereby notified that any dissemination, disclosure, distribution, copying or taking of any action in reliance on the contents of this information is strictly prohibited. If you have received this information in error, please notify US LABS immediately at 1-888-450-0145 attn: Compliance Department to arrange for return of this message including all attachments.