[Histonet] embedding without a station?

[Ford Royer]

Doesn't any body remember good 'ole lead "L's"?

Stainless steel griffon beaker in the oven worked pretty good, but we where
in hog heaven with they broke down and got us a "heated paraffin beaker".
The beaker itself wasn't actually heated.  There was an electrically heated
sleeve that the beaker sat in on the bench that kept the paraffin liquefied.
I think that it was on of Dr. McCormick's ingenious inventions...

How did we EVER survive? ... Open containers of Xylene, Formalin, Asbestos
gloves and pads, Lead "L's", and cigarette ash trays located ant each
station.

~ Ford

Ford M. Royer, MT(ASCP)
Minnesota Medical, Inc.
7177 Madison Ave. W.
Golden Valley, MN 55427-3601
CELL:  612-839-1046
Phone:  763-542-8725
Fax:  763-546-4830
eMail:  clinicallab <@t> minnesotamedical.com


-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu
[mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Smith, Allen
Sent: Wednesday, January 24, 2007 8:59 AM
To: Anila Syed
Cc: histonet <@t> lists.utsouthwestern.edu
Subject: RE: [Histonet] embedding without a station?

I have never felt that embedding stations are worth the counter space they
take up.  I just barely melt my Paraplast in a Pyrex beaker on a hotplate
and maintain its temperature in a 60 degree oven. I set out the mold on the
counter and pour in enough Paraplast to quarter fill it.  Since the beaker
is hot, I keep a cotton glove on my left hand.  I leave my right hand bare
to handle the forceps.)  I warm my forceps in the flame of an alcohol lamp,
and position my tissue on the bottom of the mold, set an embedding ring in
place, and fill the mold. I wipe the lip of the beaker with a paper towel
(usually one that has already been used for drying my hands). Everything
except the oven can be put away in a cupboard, leaving me with counter space
for other projects.

Allen A. Smith, Ph.D.
Professor of Anatomy
Barry University School of Graduate Medical Sciences
    Podiatric Medicine and Surgery
Miami Shores, Florida  33161


-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu
[mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Anila Syed
Sent: Wednesday, January 24, 2007 8:05 AM
To: histonet <@t> lists.utsouthwestern.edu
Subject: [Histonet] embedding without a station?

Dear All,

I have hundreds of carotid plaques to embedd. I have a tissue processor, but

no embedding station. Would anyone attempt to do this without an embedding 
station or do you think I should go and try to find the facilities 
somewhere?

What did people do before embedding stations?

Many thanks for your input and opinions,

Anila Syed 


_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
           
                       
                
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential, and/or privileged
material. No confidentiality or privilege is waived or lost by any errant
transmission. If you receive this message in error, please immediately
delete it and all copies of it from your system and notify the sender.
E-mail transmission cannot be guaranteed to be secure or error-free as
information could be intercepted, corrupted, lost, destroyed, arrive late or
incomplete, or contain viruses.
Barry University - Miami Shores, FL (http://www.barry.edu) 

_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet