[Histonet] Leica Prisma problem

[Mayer,Toysha N]

I would check the roller to see if it is making good contact and the slide holder track as well.  Not sure it that is what it is called, but where the slide is pushed under the roller.

Sincerely,


Toysha N. Mayer, DHSc, MBA, HT (ASCP)
Assistant Professor/Associate Program Director
HTL Program School of Health Professions
MD Anderson Cancer Center
tnmayer at mdanderson.org
713-563-3481 wk
832-710-1837 cell


Message: 1
Date: Thu, 22 Sep 2022 08:55:33 -0700
From: "Paula" <plucas at biopath.org>
To: <histonet at lists.utsouthwestern.edu>
Subject: [Histonet] Leica Prisma problem
Message-ID: <003f01d8ce9b$c0dc85c0$42959140$@biopath.org>
Content-Type: text/plain;       charset="us-ascii"

Hello everyone,



We have the Leica Prisma film coverslipper and suddenly, there are bubbles underneath the film. I changed out the Xylene and inserted a new film roll but the problem persists.  Is there anything that you recommend to solve the problem?



Thank you in advance,

Paula Lucas

Lab Manager

Bio-Path Medical Group



------------------------------

*****************************************

The information contained in this e-mail message may be privileged, confidential, and/or protected from disclosure. This e-mail message may contain protected health information (PHI); dissemination of PHI should comply with applicable federal and state laws. If you are not the intended recipient, or an authorized representative of the intended recipient, any further review, disclosure, use, dissemination, distribution, or copying of this message or any attachment (or the information contained therein) is strictly prohibited. If you think that you have received this e-mail message in error, please notify the sender by return e-mail and delete all references to it and its contents from your systems.