[Histonet] H&E Stainer Question

Joelle Weaver joelleweaver at hotmail.com
Tue May 12 11:26:58 CDT 2015


Personally I love the Prisma for volume and the tape. I know many have bad opinions, but I wish I had both the Prisma and the tape right now! I have never seen any problems with very old ( 15+ year) slides. using the tape.  Not saying it can't happen-but have not personally seen it. The tape is easier to get off if you need to versus old glass CS, just use acetone, acetone/xylene, xylene. Comes off in a gel form and slides right off leaving the tissue intact. 


Joelle Weaver MAOM, HTL (ASCP) QIHC

        
  

 
> From: Royl1 at LabCorp.com
> To: patpxs at gmail.com; histonet at lists.utsouthwestern.edu
> Date: Tue, 12 May 2015 12:18:46 +0000
> Subject: Re: [Histonet] H&E Stainer Question
> 
> Paula
> Here are my two cents....
> 
> I currently use a Leica Autostainer XL with attached glass coverslipper.  It is consistent in its staining and easy to use.  The downfall is if you are a large volume lab or just have large volume days, each staining rack holds 30 slides and only one rack can be stained in each batch. The stainer also only has one on board oven, so the throughput of this machine is fairly low.  It is only staining 30 slides at a time, with one holding station for the next set.  It will run multiple batches concurrently, but gets to a point where it is all backed up.  We sometimes have 2 racks staining, one in the oven, one in the loading dock, and some sitting on top of the stainer until it can go on. 
> 
> On the flip side, the Sakura Prisma is a workhorse.  It is very similar to the Leica in the sense that it is linear and very consistent in staining.  It has two on board ovens and each basket can hold 20 slides.  The difference is that the Sakura can stain 3 racks (60 slides) per batch, with two batches in the oven at the same time.  That gives you 120 slide throughput for each batch.  This stainer also has an attached coverslipper (Sakura Film), but it is film coverslips.  I know, I know.....no one likes the film coverslips.  One advantage to the film, is that the slides are dry almost immediately and can be filed away the same day.  No waiting for 3-4 days for the glass ones to fully cure.  I can say that the last lab I worked in had the film coverslips and after 10 years, the slides were still in pristine condition.  There are many pathologists that do not like to read film covered slides, but once ours got used to it, they had no problems.  Some say the film yellows or comes off with the tissue still attached.  I can say that I never seen this in my past position.  It is very dependent on Xylene only during coverslipping.  You cannot use a xylene substitute in the coverslip portion and expect to get good results.    
> 
> Hope it helps....good luck.
> Lisa
> 
> -----Original Message-----
> From: Paula Sicurello [mailto:patpxs at gmail.com] 
> Sent: Monday, May 11, 2015 5:04 PM
> To: HistoNet
> Subject: [Histonet] H&E Stainer Question
> 
> Me again...
> 
> UCSD is in the market for a new H&E stainer for our new hospital opening next year.
> 
> We need a workhorse, not a prima dona, something with a coverslipper built in would be nice.
> 
> What do you use?
> 
> Suggestions gratefully accepted-even from you two Keith and Matt  ;)
> 
> Opinions about the good, the bad, and the ugly (as long as it works really
> well) will be helpful.
> 
> Thanks oodles!
> 
> Paula  :-)
> _______________________________________________
> Histonet mailing list
> Histonet at lists.utsouthwestern.edu
> http://lists.utsouthwestern.edu/mailman/listinfo/histonet
> -This e-mail and any attachments may contain CONFIDENTIAL information, including PROTECTED HEALTH INFORMATION. If you are not the intended recipient, any use or disclosure of this information is STRICTLY PROHIBITED; you are requested to delete this e-mail and any attachments, notify the sender immediately, and notify the LabCorp Privacy Officer at privacyofficer at labcorp.com or call (877) 23-HIPAA / (877) 234-4722. 
> 
> 
> _______________________________________________
> Histonet mailing list
> Histonet at lists.utsouthwestern.edu
> http://lists.utsouthwestern.edu/mailman/listinfo/histonet
 		 	   		  


More information about the Histonet mailing list