[Histonet] Block Counts

[Morken, Timothy]

I agree with Diana, I found we had over a dozen different task mixes in a given day for various techs. That includes mix of block types (bx, extensive lists of stain requests per block, single H&E, recuts, mega block, research cases), other tasks (Staining, speicals, ihc, tissue processor . Grossing would be even more complicated. Instead of a per-day count, use per hour or per two hours - Some period when the person is concentrating on a single task without interruption. 

Tim Morken
Supervisor, Histology, Electron Microscopy and Neuromuscular Special Studies
UC San Francisco Medical Center
San Francisco, CA

CONFIDENTIALITY NOTICE: This email message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential, proprietary, and/or privileged information protected by law. If you are not the intended recipient, you may not use, copy, or distribute this email message or its attachments. If you believe you have received this email message in error, please contact the sender by reply email and destroy all copies of the original message.

-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu [mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Diana McCaig
Sent: Monday, January 12, 2015 2:46 PM
To: 'Goins, Tresa'; Ellen; histonet <@t> lists.utsouthwestern.edu
Subject: RE: [Histonet] Block Counts 

I have always found there are so many variables that having an expectation of setting a set number is not always possible.  I feel they should be compared to their own standards and not of their co-workers.  If they can cut or embed a set number on a particular than they should maintain or gradually increase (for newer techs) over time.  .
I have seen where in one day they cut so many blocks when the work load mandates it but on a slower day it takes them just as much time to cut half as many blocks.  The work pace should be at their comfort level but should be a standard rate.

Diana 
-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu [mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Goins, Tresa
Sent: January-12-15 4:58 PM
To: Ellen; histonet <@t> lists.utsouthwestern.edu
Subject: RE: [Histonet] Block Counts 

Depends on the type of tissue.
Depends on the length of time your "day" is for a repetitive task.
Assigning an arbitrary number is counterproductive.


-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu [mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Ellen
Sent: Monday, January 12, 2015 1:57 PM
To: histonet <@t> lists.utsouthwestern.edu
Subject: [Histonet] Block Counts 

I'm looking for raw data on time studies that directly deal with the number of blocks a PA can produce in a day and how many a histo tech can cut a day. 


Thanks

Sent from my iPhone
_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet