[Histonet] Acid Cleaned glassware

[Rene J Buesa]

Venting the MW oven is just a safety issue and has nothing to do with the cleaning of the glassware and the quality of the staining procedure.
René J.  


On Wednesday, June 4, 2014 1:01 PM, "Abbott, Tanya" <TanyaAbbott <@t> catholichealth.net> wrote:
  


We just acquired a brand new laboratory microwave to replace ours from the 1980s,..........so we are optimizing our GMS stain. Currently we would let the glassware sit in
Chromic acid for 1 hr to chemically clean the glassware before staining. Now we are using the CAP required polypropylene vented microwave containers. Can we skip the chromic
Acid step?

Tanya G. Abbott RT (CSMLS)
Manager Technologist, Histology/Cytology
St. Joseph Medical Center
Reading, PA 19603-0316
ph  610-378-2635
fax 610-898-5871
email: tanyaabbott <@t> catholichealth.net

This electronic mail and any attached documents are intended solely for the named addressee(s) and contain confidential information. If you are not an addressee, or responsible for delivering this email to an addressee, you have received this email in error and are notified that reading, copying, or disclosing this email is prohibited. If you received this email in error, immediately reply to the sender and delete the message completely from your computer system.
_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet