[Histonet] RE: ATPase without barbital buffer... info
Tony Henwood (SCHN)
tony.henwood <@t> health.nsw.gov.au
Wed Jan 30 16:07:31 CST 2013
Hi Tim,
Well done
Regards
Tony Henwood JP, MSc, BAppSc, GradDipSysAnalys, CT(ASC), FFSc(RCPA)
Laboratory Manager & Senior Scientist
Tel: 612 9845 3306
Fax: 612 9845 3318
the children's hospital at westmead
Cnr Hawkesbury Road and Hainsworth Street, Westmead
Locked Bag 4001, Westmead NSW 2145, AUSTRALIA
-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu [mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Morken, Timothy
Sent: Thursday, 31 January 2013 6:09 AM
To: Histonet
Subject: [Histonet] ATPase without barbital buffer... info
Well, I finally found the original papers on the subject of non-barbital buffers for ATPase from the Histonet posting below from Tony Henwood:
The reference given for the procedure was : "Loughlin, M. (1993). Muscle biopsy. A laboratory investigation. Butterworth-Heinemann pp.78-79."
But that is a book and one not available through our store. So I went online and was able to get the book for ....$2.00. yes, Two Dollars!
Now I can give everyone the original references in the book. We have not tried this yet but plan to this year.
The book actually has several ATPase methods that do not use barbital buffer on pages 77 - 82 (1993 edition).
(One note. The page reference given by Tony's posting below seems to be the Brooke and Kaiser pH 4.3 and 4.6 method on page 81-82 combined with the Round pH 9.4 method on pp 80-81
1) Tris incubating buffer pH 9.4 (Louglin pp 77-79)
a. Hayashi and Freiman, An Improved Method of Fixation for Formalin Sensitive Enzymes with Special Reference to Myosin Adenosine Triphosphatase, J Histochem & Cytochem, 1966 14: 577-581
2) Glycine incubating buffer pH 9.4 (Laughlin pp 80-81
a. Round, et. Al. Quick, Simple and Reliable Method for ATPase in Human Muscle Preparations. The Histochemical Journal, Nov 1980, Vol 12, Issue 6, pp 707-710
3) Acetate incubating buffer pH 4.3 and 4.6 ("reverse" ATPase) (Laughlin pp 81-82
a. Brooke, M.H. and Kaiser, K.K., Muscle Fibre Types: How many and what kind? Archives of Neurology, (Chicago), 1970, 23, 369-379
Another non-barbital method is:
Khan, M.A., et al, A calcium-citro-phosphate technique for the histochemical localization of myosin ATPase, Stain Technology, 1972, Vol. 47, No. 6, pp. 277-281.
Tim Morken
Supervisor, Electron Microscopy/Neuromuscular Special Studies Department of Pathology UC San Francisco Medical Center
************************************************************
ATPase with sodium acetate buffer
Tony Henwood AnthonyH <@t> chw.edu.au
Sun Aug 20 18:14:40 CDT 2006
Here is our method using acetate buffer in place of barbiturate buffer:
Adenosine Triphosphatase (ATPases) [Note: this is the Brooke and Kaiser 4.3 and 4.6 method combined with the Round 9.4 method. tm]
Use
Demonstration of muscle fibre types.
Underlying Principle
The principle relies on the ability of the enzyme to remove the terminal phosphate from the ATP, which then combines with calcium in the incubation solution to form an insoluble calcium phosphate. Cobalt is then exchanged for the calcium, which, after reaction with ammonium sulphide, forms a black, insoluble cobalt sulphide at the site of enzyme activity.
Fixation and Sectioning
Air dried unfixed 8µm cryostat sections
Reagents
1. 1% calcium chloride
a. Calcium chloride 5.0 g
b. Distilled water 500ml
2. 2% Cobalt chloride
Warning: Suspected Carcinogen - see MSDS
a. Cobalt chloride 10.0 g
b. Distilled water 500 ml
3. 1% Ammonium sulphide
Warning: Flammable liquid, Irritant, Toxic stench - see MSDS
a. 20% ammonium sulphide 0.5 ml
b. Distilled water 9.5 ml
4. Acid Pre-incubation medium
a. 0.2M Sodium Acetate
i. Sodium Acetate Anhydrous 0.82 g
ii. Distilled water 50 ml
iii.
b. 0.2M Acetic Acid
i. Glacial Acetic Acid 0.6 ml
ii. Distilled water 50 ml
5. 0.2M Acetate Buffer: pH 4.3 pH 4.6
a. 0.2M Sodium Acetate 11 ml 18 ml
b. 0.2M Acetic Acid 12 ml 13 ml
Adjust to pH 4.3 or 4.6 with 0.2M Sodium Acetate or 0.2M Acetic Acid ?
6. 7.5% Calcium Chloride
a. Calcium Chloride 7.5g
b. Distilled water 100ml
7. 7.05% Glycine
a. Glycine 7.05g
b. Distilled water 100ml
Freeze in 2ml aliquots, defrost one aliquot before use.
8. 5.625% Sodium Chloride
a. Sodium Chloride 5.625g
b. Distilled water 100ml
9. 3.5% Sodim Hydroxide
a. Sodium Hydroxide 3.5g
b. Distilled water 100ml
10. Alkaline Stock
Warning: Irritant - see MSDS
a. 7.05% Glycine 2ml
b. 7.5% Calcium Chloride 2ml
c. 5.625% Sodium Chloride 2ml
d. 3.5% Sodium Hydroxide 2ml
e. Distilled water 42ml
11. Incubating Medium
a. Alkaline Stock 25 ml
b. ATP (Sigma A-7699) 40 mg
Adjust to pH 9.4 - 9.5 with 0.1M HCl
Method for preparing 9.4 Substrate Solution
1. Prepare fresh Alkaline Stock for each run
2. Place in 37oC Oven for 20minutes
3. pH to 11 using 0.1M NaOH (to activate the ATP)
4. Add ATP
5. pH to 9.4 using 0.1M HCl
Staining Method
1. Place one slide in 4.3 and one in 4.6 buffer at room temperature for 20 minutes
2. Wash each in distilled water 3 times
3. Place these slides (one from the 4.3 solution , one from 4.6 solution and the 9.4 slide) in the 9.4
substrate at 37°C for:
a. pH 9.4 10 mins
b. pH 4.6 30 mins
c. pH 4.3 45 mins
4. Place slides in 2 changes of 1% calcium chloride 3 min each
5. Place slides in 2% cobalt chloride 3 min
6. Wash well in distilled water
7. In fume cupboard drain slides well and place in ammonium sulphide solution for 1 min
8. Wash well in tap water
9. Dehydrate clear and mount.
Results
pH 9.4
Type 1 fibres pale
Type 2A fibres intermediate
Type 2B fibres dark
pH 4.3 and pH 4.6
pH 4.3 pH 4.6
Type 1 fibres dark dark
Type 2A fibres pale pale
Type 2B fibres pale intermediate
Type 2C fibres intermediate dark
Notes
This is a complicated stain and there are several areas in which one needs to be careful in order to achieve a good fibre type differentiation.
1. The pH of all solutions is critical
2. Timing is crucial
a. The stock ammonium sulfide must still be yellow. As it ages or oxidizes, it becomes
more red and cannot be used.
3. The pH of all solutions must be adjusted at the temperature they will be used.
References
1. Loughlin, M. (1993). Muscle biopsy. A laboratory investigation. Butterworth-Heinemann
pp.78-79. [actually pp 81-82. tm]
Regards
Tony Henwood JP, MSc, BAppSc, GradDipSysAnalys, CT(ASC) Laboratory Manager & Senior Scientist The Children's Hospital at Westmead, Locked Bag 4001, Westmead, 2145, AUSTRALIA.
Tel: 612 9845 3306
Fax: 612 9845 3318
_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
*********************************************************************************
This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you are not the intended recipient, please delete it and notify the sender.
Views expressed in this message and any attachments are those of the individual sender, and are not necessarily the views of The Children's Hospital at Westmead
This note also confirms that this email message has been virus scanned and although no computer viruses were detected, The Childrens Hospital at Westmead accepts no liability for any consequential damage resulting from email containing computer viruses.
*********************************************************************************
More information about the Histonet
mailing list