[Histonet] RE: Paraffin blocks cracking

Mayer,Toysha N TNMayer <@t> mdanderson.org
Wed Jan 4 12:43:23 CST 2012


Also, using 100% alcohol on the cold plate induces cracking. Freeze spray does too, although some people will never admit to using it. Both of these things induce the rapid cooling effect.

Toysha N. Mayer, MBA, HT (ASCP)
Instructor
Program in Histotechnology
School of Health Professions
MD Anderson Cancer Center
(713) 563-3481
tnmayer <@t> mdanderson.org
------------------------------

------------------------------

Message: 8
Date: Wed, 4 Jan 2012 17:55:56 +0000 (UTC)
From: Pam  Marcum <mucram11 <@t> comcast.net>
Subject: Re: [Histonet] Paraffin Blocks Cracking
To: Rene J Buesa <rjbuesa <@t> yahoo.com>
Cc: histonet <@t> lists.utsouthwestern.edu
Message-ID:
	<1488794099.223852.1325699756078.JavaMail.root <@t> sz0001a.westchester.pa.mail.comcast.net>
	
Content-Type: text/plain; charset=utf-8

I agree however; leaving blocks on the cold plate too long will also cause cracking of blocks even at -2C. 




----- Original Message -----
From: "Rene J Buesa" <rjbuesa <@t> yahoo.com> 
To: histonet <@t> lists.utsouthwestern.edu, "Brian foster" <brian1975 <@t> email.com> 
Sent: Wednesday, January 4, 2012 11:50:13 AM 
Subject: Re: [Histonet] Paraffin Blocks Cracking 

Rapid cooling is the problem, but I do not think that -5??C can cause it. The effect is more noticeable in large but thin blocks. 
Ren?? J. 

--- On Wed, 1/4/12, Brian foster <brian1975 <@t> email.com> wrote: 


From: Brian foster <brian1975 <@t> email.com> 
Subject: [Histonet] Paraffin Blocks Cracking 
To: histonet <@t> lists.utsouthwestern.edu 
Date: Wednesday, January 4, 2012, 12:33 PM 


Hello all, 


I am studying for my HTL and have a question that has been a problem for me and was wondering if anyione out there can help. "What cuases paraffin blocks to crack ?" So far i have come up with it has to do the crystal formation during cooling, and I have seen some Histonet articles that say the block cooling plate at the embedding may be too cold ( less than -5 C). Can anyone confirm that is the is the correct cause of the problem? 
_______________________________________________ 
Histonet mailing list 
Histonet <@t> lists.utsouthwestern.edu 
http://lists.utsouthwestern.edu/mailman/listinfo/histonet 
_______________________________________________ 
Histonet mailing list 
Histonet <@t> lists.utsouthwestern.edu 
http://lists.utsouthwestern.edu/mailman/listinfo/histonet 


------------------------------

_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

End of Histonet Digest, Vol 98, Issue 4
***************************************



More information about the Histonet mailing list