[Histonet] RE: Cleaning molds

[Rittman, Barry R]

Dorothy
trying to be "green".
Whatever solution you use it is probably best if you can leave the steel molds in an oven for s short time to remove excess wax before the final step. This will decrease the amount of solvent or soap you need to use.
Or you can just heat in soapy water, allow to cool, remove wax on surface of fluid and then  quick rinse.
Barry

________________________________________
From: histonet-bounces <@t> lists.utsouthwestern.edu [histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Susan.Walzer <@t> HCAHealthcare.com [Susan.Walzer <@t> HCAHealthcare.com]
Sent: Friday, August 27, 2010 2:16 AM
To: Dorothy.L.Webb <@t> HealthPartners.Com; histonet <@t> lists.utsouthwestern.edu
Subject: [Histonet] RE: Cleaning molds

Ours go on the VIP during the cleaning cycle. Then we dip them in a bucket of alcohol containing mold release and spread them out to dry on a clean towel.

-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu [mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Webb, Dorothy L
Sent: Thursday, August 26, 2010 11:54 AM
To: 'histonet <@t> lists.utsouthwestern.edu'
Subject: [Histonet] Cleaning molds

Does anyone in histoland clean their embedding molds in a dishwasher?  Otherwise, besides placing in the cleaning cycle of your processor, how do sites clean their molds??  Simple, but plaguing question!!!!!!!  Thanks all!

Dorothy Webb



  ________________________________
This e-mail and any files transmitted with it are confidential and are intended solely for the use of the individual or entity to whom they are addressed. If you are not the intended recipient or the individual responsible for delivering the e-mail to the intended recipient, please be advised that you have received this e-mail in error and that any use, dissemination, forwarding, printing, or copying of this e-mail is strictly prohibited.

If you have received this e-mail in error, please immediately notify the HealthPartners Support Center by telephone at (952) 967-6600. You will be reimbursed for reasonable costs incurred in notifying us. HealthPartners R001.0
_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet