[Histonet] Slide printers (ink)

Charles, Roger rcharles <@t> state.pa.us
Wed Feb 6 07:09:29 CST 2008


I would have to say yes since the slides must be stacked on top of each
other in the hopper. 

Roger Charles
Microbiologist
Pennsylvania Veterinary Laboratory
2305 N Cameron St
Harrisburg, PA 17110
717-787-8808

-----Original Message-----
From: pkromund <@t> gundluth.org [mailto:pkromund <@t> gundluth.org] 
Sent: Tuesday, February 05, 2008 4:35 PM
To: Patti Loykasek
Cc: histonet <@t> lists.utsouthwestern.edu;
histonet-bounces <@t> lists.utsouthwestern.edu; Kim Merriam; Charles, Roger
Subject: Re: [Histonet] Slide printers (ink)

Do any of these slide printers affect precut control tissue on the
charged
slides?
Pamela


 

             Patti Loykasek

             <ploykasek <@t> phenop

             ath.com>
To 
             Sent by:                  "Charles, Roger"

             histonet-bounces@         <rcharles <@t> state.pa.us>, Kim
Merriam 
             lists.utsouthwest         <kmerriam2003 <@t> yahoo.com>

             ern.edu
cc 
                                       histonet <@t> lists.utsouthwestern.edu

 
Subject 
             02/05/2008 02:39          Re: [Histonet] Slide printers
(ink) 
             PM

 

 

 

 

 





Roger- We have been using a sakura slide printer for a couple of years.
I
do
agree with your comments about the software - not user friendly at all
nor
is it intuitive. I have used Access database in the past without these
issues. I do not know about the labels, I don't think we've had that
issue.
Maybe it varies with the label. I don't quite understand your comment on
charged slides, as all of the slides we put thru the printer are charged
and
we have no issues with that. We use charged slides (Okando Plus) from
BBC
and Probe-On Plus slides from ThermoFisher. What brand of slides were
you
using & what issue did you have with the slide printer from the usage?


Patti Loykasek BS, HTL, QIHC
PhenoPath Laboratories
Seattle, WA







> Hello,
> Recently we bought a sakura slide writer that uses ink to print. The
> only problem I have found with the ink is if you put labels over the
> print and then try to remove the label to verify a number error, or
> something like that, the ink will actually come off with the label.
If
> you can read upside down you can still verify the number.  I did run
> this ink thru a battery of chemicals including straight formic acid
for
> 5 minutes and the ink did not leave the slide.  I would caution in
> buying a Sakura slide write as it has a very unfriendly Access based
> program and the writer does not work with charged slides.  This has
been
> verified by me and an independent engineer sent to look at this issue.
> I do use a TBS cassette writer and love that so if I can get my sakura
> sent back I will be looking at TBS's slide writer too.
> Good luck
> Roger
>
> Roger Charles
> Microbiologist
> Pennsylvania Veterinary Laboratory
> 2305 N Cameron St
> Harrisburg, PA 17110
> 717-787-8808
>
> -----Original Message-----
> From: histonet-bounces <@t> lists.utsouthwestern.edu
> [mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Kim
> Merriam
> Sent: Tuesday, February 05, 2008 2:48 PM
> To: Histonet
> Subject: [Histonet] Slide printers (ink)
>
> Hi everyone,
>
> I was wondering what everyone's experience was with the TBS slide
> printer (Shurmark-plus), the one that prints with ink?  I would
> appreciate input, good or bad.
>
> We currently have an etcher, and we hate it, so we are looking to
> trade it in for something that uses ink.  I have used the Leica
printer
> in the past and have had reasonably good luck with it, but I was
> wondering about the printer from TBS, I don't know anyone that has
one.
>
> Kim
>
>
> Kim Merriam, MA, HT(ASCP)
> Cambridge, MA
>
> ---------------------------------
> Be a better friend, newshound, and know-it-all with Yahoo! Mobile.
Try
> it now.
> _______________________________________________
> Histonet mailing list
> Histonet <@t> lists.utsouthwestern.edu
> http://lists.utsouthwestern.edu/mailman/listinfo/histonet
>
> _______________________________________________
> Histonet mailing list
> Histonet <@t> lists.utsouthwestern.edu
> http://lists.utsouthwestern.edu/mailman/listinfo/histonet
>



This e-mail message, including any attachments, is for the sole use of
the
intended recipients and may contain privileged information. Any
unauthorized
review, use, disclosure or distribution is prohibited. If you are not
the
intended
recipient, please contact the sender by e-mail and destroy all copies of
the
original message, or you may call PhenoPath Laboratories, Seattle, WA
U.S.A.
at (206) 374-9000.


_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet




More information about the Histonet mailing list