[Histonet] Paraplast Plus/Lost wax

[Jackie M O'Connor]

And if the kids start to taste almonds while working with the DMSO, they 
should probably stop. 




"Ford Royer" <froyer <@t> bitstream.net> 
Sent by: histonet-bounces <@t> lists.utsouthwestern.edu
02/01/2007 08:48 AM

To
<histonet <@t> lists.utsouthwestern.edu>
cc

Subject
RE: [Histonet] Paraplast Plus/Lost wax






My first thought was the same as Cheryl's that there may be unwanted 
residue
(from the polymers & plastics) left over from the "burn out".  Also, the 
wax
used in the "Lost Wax" method is normally a combination of pure paraffin 
and
bees wax in a ratio of about 60/40.  But as Cheryl suggests - try it out 
on
a practice piece and see what happens.  If it works with no residue, I 
would
then recommend that the instructor procure some bees wax (available at all
craft stores) and add that to their Paraplast for even better results. 
They
may find that Paraplast alone is too brittle to handle when harden.  The
bees wax makes the mixture more malleable for easier finishing touch-ups
before final molding.

If the Paraplast is found unsuitable due to the aforementioned concerns,
then there are other things that the school could use it for.  I donated
some old embedding media to my kid's school to make candles and fire
starters that they sold at a school-wide crafts fair as a fund raiser.
Contact me "Off List" for more detail if interested.

~ Ford

Ford M. Royer, MT(ASCP)
Minnesota Medical, Inc.
7177 Madison Ave. W.
Golden Valley, MN 55427-3601
CELL:  612-839-1046
Phone:  763-542-8725
Fax:  763-546-4830
eMail:  clinicallab <@t> minnesotamedical.com

-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu
[mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Cheryl 
Kerry
Sent: Wednesday, January 31, 2007 5:12 PM
To: histonet <@t> lists.utsouthwestern.edu
Subject: RE: [Histonet] Paraplast Plus/Lost wax


Lost wax methods require the wax 'burn out' completely when heated prior 
to
casting. With the plastics in the wax--there might be a residue.

Only one way to find out--try it!

Cheryl
Full Staff Inc
281.852.9457
 
 


_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet