[Histonet] Re: Newly designed Labs

BRobert <@t> ameripath.com BRobert <@t> ameripath.com
Tue Jan 20 16:19:37 CST 2004


These are very good observations, I experienced similar problems in the past
with lab not designed to accomodate the equipment size, proximity to water
for stainers for example, cabinetery too low to be able to fit any equipment
on counters etc. the ventilation is definitely something to be planned as
you do not want any fumes in the rooms but not too much air draft in the
cutting area either but good fresh air where you have heat producing
equipment.
Including the techs in the planning is a must if you do not want to remodel
your lab all the time once it's done!

Good luck! 

p.s. I remember a workshop on the subject at the NSH meeting a few years
ago, maybe someone has more details or a copy of the hand out for you!

Brigitte

-----Original Message-----
From: Starkus, Laurie [mailto:StarkusL <@t> ummhc.org]
Sent: Tuesday, January 20, 2004 8:52 AM
To: 'Cheasty, Sandra'; Linda Jenkins; histonet <@t> lists.utsouthwestern.edu
Subject: RE: [Histonet] Re: Newly designed Labs


Sandra makes an excellent point here.  I'm currently working in a Mohs lab
that was just designed three years ago.  Because no one thought to ask me
(the only tech working here), no one considered that a cryostat generates a
LOT of heat as it cools.  Consequently, we are running a room air
conditioner 24 hours a day, 7 days a week, 365 days a year.  Yes, it was -10
outside this past week, and we are running an air conditioner.  And, you
still can't close the door or the air conditioner can't keep up.

Also, they forgot to include room for the explosives cabinet (for ethanol)
and our microscope is behind the door.  So, when someone is using the
microscope, the door isn't all the way open.  Our surgeon sometimes gets hit
in the butt with the door as people try to get into the lab.

-----Original Message-----
From: Cheasty, Sandra [mailto:SCheasty <@t> ahs.llumc.edu]
Sent: Tuesday, January 20, 2004 11:39 AM
To: Linda Jenkins; histonet <@t> lists.utsouthwestern.edu
Subject: RE: [Histonet] Re: Newly designed Labs


Frank,
	The biggest mistakes I've seen in designing labs or Information
Systems is not including the end-user's input.  Often the pathologists will
have the last say, but they are not the ones who are processing the
specimens from start to finish. You can avoid a lot of expensive changes
after the fact, (and a lot of hurt feelings from staff) by having an avenue
for staff to give input and keeping everyone aware of how things are
proceeding.  Whether the ideas are good and used, or not-so-good and
discarded, I have found it worthwhile to include input from everyone.
	Also, if you have access to Microsoft Visio, (sort of a simple CAD
software program) you can lay out the space easily and throw in counters and
sinks and fume hoods and desks and re-arrange them in endless ways to give
you ideas.

Sandy

 -----Original Message-----
From: 	histonet-bounces <@t> lists.utsouthwestern.edu
[mailto:histonet-bounces <@t> lists.utsouthwestern.edu]  On Behalf Of Linda
Jenkins
Sent:	Tuesday, January 20, 2004 08:25
To:	histonet <@t> lists.utsouthwestern.edu
Subject:	[Histonet] Re: Newly designed Labs

Hi, Frank,
         Based on my previous experience with designing a new lab, the one 
thing we didn't check on was the location of the critical power 
outlets.  The electrical people put in the correct number BUT they put them 
all on one wall.  Also, we needed at least one - two more sinks.
         Have fun planning!
         Linda

Linda Jenkins, HT
Clemson University
Dept. of Bioengineering
Clemson, SC 29634-0905
864.656.5553
http://www.ces.clemson.edu/bio/research/histo/histo.htm


_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet



Confidentiality Note:

The preceding e-mail message (including any attachments) contains
information that may be confidential, protected by applicable legal
privileges, or constitute non-public information. It is intended to be
conveyed only to the designated recipient(s). If you are not an intended
recipient of this message, please notify the sender by replying to this
message and then delete it from your system. Use, dissemination,
distribution or reproduction of this message by unintended recipients is not
authorized and may be unlawful.



_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet




More information about the Histonet mailing list