[Histonet] Re: Newly designed Labs

Jackie.O'Connor <@t> abbott.com Jackie.O'Connor <@t> abbott.com
Tue Jan 20 11:19:46 CST 2004


Many many years ago - we started our first day in a newly built hospital 
histo lab just to realize that we had all the bench top jets we needed, 
i.e., air, gas, (we used a flame to embed with then) vacuum, water - but 
no one put in the 'guts' for any of those features - just the jets - for 
decoration, I suppose.

Jacqueline M. O'Connor HT(ASCP)
Abbott Laboratories
Global Pharmaceutical Research and Development
Discovery Chemotheraputics





"Stapf, Ross" <RossS <@t> BaylorHealth.edu>
Sent by: histonet-bounces <@t> lists.utsouthwestern.edu
01/20/2004 10:55 AM

 
        To:     <histonet <@t> lists.utsouthwestern.edu>
        cc: 
        Subject:        RE: [Histonet] Re: Newly designed Labs


At my old hospital when designing the lab somehow the blueprints were
flipped and ventalation ducts ended up next to the cutting stations.
Because the contractors wouldn't let us in the lab area until they were
finished and our supervisor at the time didn't insist on inspecting the
area, this wasn't noticed until they told us we could move in.
Obviously they had to make a change before we could move in, costing
money and time.

Once construction starts inspect the area.  Make sure you have authority
to make changes after they start.  It is likely that once things start
to get in place you will see problems that are easier to correct in the
middle of the renovation than after the renovation.

Good luck.

Ross M Stapf
Histopathology Manager
Baylor University Medical Center
3500 Gaston Ave.
Dallas, TX 75246
214-820-2465 
214-820-4110 fax
RossS <@t> baylorhealth.edu



-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu
[mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Linda
Jenkins
Sent: Tuesday, January 20, 2004 10:25 AM
To: histonet <@t> lists.utsouthwestern.edu
Subject: [Histonet] Re: Newly designed Labs


Hi, Frank,
         Based on my previous experience with designing a new lab, the
one 
thing we didn't check on was the location of the critical power 
outlets.  The electrical people put in the correct number BUT they put
them 
all on one wall.  Also, we needed at least one - two more sinks.
         Have fun planning!
         Linda

Linda Jenkins, HT
Clemson University
Dept. of Bioengineering
Clemson, SC 29634-0905
864.656.5553 http://www.ces.clemson.edu/bio/research/histo/histo.htm


_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet





More information about the Histonet mailing list