[Histonet] (no subject)

Manfre, Philip philip_manfre <@t> merck.com
Mon Sep 9 08:42:48 CDT 2013


It's a bad question.  Generally the "best" temperature is probably between 55 and 65, depending on the paraffin.  This would fall between the two latter answers.  Hmm....  What to do?

Phil.

Philip Manfre, B.A., HT (ASCP)
Associate Principal Scientist
Merck Research Laboratories
WP45-251
PO Box 4
West Point, PA 19486

215-652-9750
215-993-0383 (fax)
philip_manfre <@t> merck.com




-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu [mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Martin, Erin
Sent: Monday, September 09, 2013 9:28 AM
To: histonet
Cc: Naujokas, Agne; Meier, Melissa
Subject: [Histonet] (no subject)

Good morning all!

One of our fellows emailed me a question that she came across while studying for her boards:



"I'm studying for my board exam and came across questions re: paraffin embedding.
It reads: best temperature for paraffin embedding is
38-48
48-58
58-70.
I am getting some info on Internet that says 58 but is the range lower or higher than that? What do we use?"

This seems to me to be an odd question because it depends on the melting point of the paraffin in use.  Ours melts at 58C and we embed at 60C, but we have also used paraffin that melts at 56C and we embedded at 58C.  Or am I missing something?  Does anyone have a clear cut answer to this?



Thanks everyone!

Erin

Erin Martin, Histology Supervisor

UCSF  Dermatopathology Service
415-353-7248

Confidentiality Notice
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or priviledged material.  Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited.  If you receive this in error, please contact the sender and delete the material from any computer.
_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
Notice:  This e-mail message, together with any attachments, contains
information of Merck & Co., Inc. (One Merck Drive, Whitehouse Station,
New Jersey, USA 08889), and/or its affiliates Direct contact information
for affiliates is available at 
http://www.merck.com/contact/contacts.html) that may be confidential,
proprietary copyrighted and/or legally privileged. It is intended solely
for the use of the individual or entity named on this message. If you are
not the intended recipient, and have received this message in error,
please notify us immediately by reply e-mail and then delete it from 
your system.




More information about the Histonet mailing list