[Histonet] RE: Cornflaking artifact

Lavigne, Lisa Lisa.Lavigne <@t> sphp.com
Thu Mar 13 11:29:45 CDT 2014


We have changed lots of tape and still are having this artifact.
Lisa LaVigne CT, MB (ASCP)
Pathology Manager
St. Peter's Health Partners
315 S. Manning Blvd.
Albany, NY 12208
Phone: 518-525-5274
Fax: 518-525-6750
Email: Lisa.LaVigne <@t> sphp.com<mailto:Lisa.LaVigne <@t> sphp.com>
________________________________________
From: histonet-bounces <@t> lists.utsouthwestern.edu [histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Metzger, Kenneth [kenneth.metzger <@t> aruplab.com]
Sent: Thursday, March 13, 2014 12:13 PM
To: HERRINGTON, SHEILA; 'Laurie Colbert'; Sharon Scalise; histonet <@t> lists.utsouthwestern.edu
Subject: [Histonet] RE: Cornflaking artifact

Can anyone share the lot # on their coverslipping film (Sakura)? We are seeing this as well out of the blue..haven't changed a thing.

Kenneth G Metzger HTL(ASCP)
Histology Supervisor
ARUP Labs
Salt Lake City, Utah
Phone: (801)583-2787 ext. 3101
Fax: (801) 584-5244
Email: kenneth.metzger <@t> aruplab.com


-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu [mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of HERRINGTON, SHEILA
Sent: Thursday, March 13, 2014 9:42 AM
To: 'Laurie Colbert'; Sharon Scalise; histonet <@t> lists.utsouthwestern.edu
Subject: [Histonet] RE: Cornflaking artifact

We also have recently started to see this artifact more than ever before, and nothing in our process has changed.  We have tried everything to correct to no avail.  Wonder if it is possible to be a change in some type of supply, either xylene or coverslipping film.  Something has changed but am at a loss as to what.


Sheila Herrington
Technical Lead Histopathology and Immunohistochemistry Kelowna General Hospital
2268 Pandosy Street, Kelowna, B.C. V1Y 1T2
250-862-4300 ext 7587 or 7510
Sheila.herrington <@t> interiorhealth.ca



-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu [mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Laurie Colbert
Sent: Thursday, March 13, 2014 6:30 AM
To: Sharon Scalise; histonet <@t> lists.utsouthwestern.edu
Subject: [Histonet] RE: Cornflaking artifact

You will also see the cornflaking if your tissue is lifting off of the slide at all.  We used to get this more often on hard, decal specimens than on other specimens.  We used the film to coverslip.  If you remove the film from the problem slides and recoverslip conventionally with extra mountant and glass coverslips, I'm sure you will not see the artifact.

Laurie Colbert

-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu [mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Sharon Scalise
Sent: Wednesday, March 12, 2014 8:00 PM
To: histonet <@t> lists.utsouthwestern.edu
Subject: [Histonet] RE: Cornflaking artifact

I am looking for help with "cornflaking" (tiny, brown dry spots under coverslip)artifact.  We have been using fresh xylene on our stainer and coverslipper, cleaned and wiped all containers dry before filling, tried different lots of coverslipping film and had service on our coverslipper to make sure it was functioning properly, including the xylene drip.  We continue to have this artifact and it is driving us crazy.  It is sporadic with no pattern of tissue type or placement on the slide.  Sometimes it lands on tissue other times not.  Most of the time when we remove the coverslip and re-coverslip it goes away (I am assuming because the acetone removes any minute amounts of water that may be present).  We just cannot figure out where the water is coming from.  Has anyone seen this artifact while using the drying step on the prisma stainer?  We just recently started using the drying on some slides and I am thinking maybe it is causing humidity???  I cannot say for a fact that our "cornflaking" started at the same time, but it is suspicious. HELP!!!!!

-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu [mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Wait, Trevor Jordan
Sent: Wednesday, March 12, 2014 3:57 PM
To: histonet <@t> lists.utsouthwestern.edu
Subject: [Histonet] Paraffin type and Tetracycline labelling Questions

For those who have done Decalcified bone processing with paraffin....what is the best type of paraffin that you guys are familiar with?

Also, if you are wanting to see a tetracycline label on the bone for bone turnover, must undecalcified sections be used? How for a double tetracycline label?


Trevor Jordan Wait
University of Texas Health Science Center, San Antonio Class of 2017 MD Candidate Abilene Christian University Class of 2013 Graduate B.S.  Biochemistry _______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

 -------------------------------------------------------------------
The information transmitted by this e-mail and any included
attachments are from ARUP Laboratories and are intended only for the
recipient. The information contained in this message is confidential
and may constitute inside or non-public information under
international, federal, or state securities laws, or protected health
information and is intended only for the use of the recipient.
Unauthorized forwarding, printing, copying, distributing, or use of
such information is strictly prohibited and may be unlawful. If you
are not the intended recipient, please promptly delete this e-mail
and notify the sender of the delivery error or you may call ARUP
Laboratories Compliance Hot Line in Salt Lake City, Utah USA at (+1
(800) 522-2787 ext. 2100


_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

Confidentiality Notice:
This e-mail, including any attachments is the
property of Catholic Health East and is intended
for the sole use of the intended recipient(s). 
It may contain information that is privileged and
confidential.  Any unauthorized review, use,
disclosure, or distribution is prohibited. If you are
not the intended recipient, please delete this message, and
reply to the sender regarding the error in a separate email.
 




More information about the Histonet mailing list