[Histonet] Cell Block Preparation

Daniel Hewitt dhewitt <@t> hvhs.org
Fri Sep 6 08:05:48 CDT 2013


We recently switched most of our cell blocks from agar to Histogel,
works great. We use small disposable embedding mold, put the specimen in
the bottom and add the histogel about half way up the mold, let it
harden, pop it out and put it in the cass. Also cuts much better than
agar.

Daniel Hewitt
Histology Supervisor, HVS
412-749-7371

This email, including any attachments, is for the sole use of the
intended recipient(s) and may contain confidential and privileged
information.  Any unauthorized review, use, disclosure or distribution
is prohibited.  If you are not the intended recipient, or an agent
responsible for delivering the message to the intended recipient, please
contact the sender by reply e-mail and delete and destroy all copies of
the original message, including attachments.

Please note that any views or opinions presented in this e-mail are
solely those of the author and do not necessarily represent those of
Heritage Valley Health System.  The integrity and security of this
message cannot be guaranteed on the internet.

-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu
[mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of
Rathborne, Toni
Sent: Friday, September 06, 2013 7:18 AM
To: 'Tom McNemar'; 'Ann Specian'; histonet <@t> lists.utsouthwestern.edu
Subject: RE: [Histonet] Cell Block Preparation

I wonder if this method could be used with the product Histogel. Has
anyone tried it?

-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu
[mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Tom
McNemar
Sent: Friday, September 06, 2013 5:46 AM
To: 'Ann Specian'; histonet <@t> lists.utsouthwestern.edu
Subject: RE: [Histonet] Cell Block Preparation

This is how we do it now.  In the old days, we used agar and to my mind,
it is still the best way when you have scant material.
- Spin in a conical tube and pour off
- Melt an agar slant (we get TSA slant from micro)
- Pour the agar into the conical tube and spin for 5 minutes
- The agar will re-solidify and whatever sediment there is will be
concentrated in the very tip of the cone
- The agar will slide out of the centrifuge tube
- Slice off the very tip and wrap in lens paper
- Place the wrapped tip in a cassette and process as usual
- Embed the specimen tip down and you are good to go...

I still use this method today when I feel it necessary.  Works great.

Tom McNemar, HT(ASCP)
Histology Co-ordinator
Licking Memorial Health Systems
(740) 348-4163
(740) 348-4166
tmcnemar <@t> lmhealth.org
www.LMHealth.org


-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu
[mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Ann
Specian
Sent: Thursday, September 05, 2013 12:45 PM
To: histonet <@t> lists.utsouthwestern.edu
Subject: [Histonet] Cell Block Preparation


I am getting complaints in regard to "insufficient" cell blocks.  We
currently spin, pour off the supernatant, retrieve the sediment and
process in lens paper.

Does anyone have a more current technique which renders better
cellularity?

Also, do you know which renders a better cell block:  a fresh specimen,
a specimen fixed in Cytolyt or a specimen fixed in 10% NBF?

Thanks,
Ann
_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

This e-mail, including attachments, is intended for the sole use of the
individual and/or entity to whom it is addressed, and contains
information from Licking Memorial Health Systems which is confidential
or privileged. If you are not the intended recipient, nor authorized to
receive for the intended recipient, be aware that any disclosure,
copying, distribution or use of the contents of this e-mail and
attachments is prohibited. If you have received this in error, please
advise the sender by reply e-mail and delete the message immediately.
You may also contact the LMH Process Improvement Center at 740-348-4641.
E-mail transmissions cannot be guaranteed to be secure or error-free as
information could be intercepted, corrupted, lost, destroyed, arrive
late or incomplete, or contain viruses. The sender therefore does not
accept liability for any errors or omissions in the contents of this
message, which arise as a result of e-mail transmission. Thank you.

_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet



More information about the Histonet mailing list