[Histonet] H&E Stainer Leica vs Sakura (Sophia Lin)

Matthew Roark mroark <@t> sfmc.net
Thu Mar 21 12:31:55 CDT 2013


I currently use the Leica stainer and coverslipper without any problems.  I
took some time, at first, to fine tune the coverslipper but have not had any
real problems since. 

Both are workhorses.


Matthew Roark- HT/HTL(ASCP)CM
Histology Specialist
Saint Francis Medical Center
211 Saint Francis Drive
Cape Girardeau, MO 63703
573-331-5267
mroark <@t> sfmc.net
http://www.sfmc.net





-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu
[mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Pratt,
Caroline
Sent: Thursday, March 21, 2013 10:00 AM
To: kgrobert <@t> rci.rutgers.edu; histonet <@t> lists.utsouthwestern.edu
Subject: RE: [Histonet] H&E Stainer Leica vs Sakura (Sophia Lin)

We recently purchased a Sakura and we are very, very pleased with the
results and ease of use. :)

-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu
[mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of
kgrobert <@t> rci.rutgers.edu
Sent: Thursday, March 21, 2013 9:32 AM
To: histonet <@t> lists.utsouthwestern.edu
Subject: RE: [Histonet] H&E Stainer Leica vs Sakura (Sophia Lin)

I have the Leica stainer and coverslipper, and I don't have anywhere near as
many problems with the coverslipper as  described by "Contact" below.

Mine alerts once in a while; if his alerts that much, then something is
seriously wrong.  (The last time mine alerted that much, it needed a new
"brain"-this is an older machine that had 5 circuit boards and one gave
out-and one new sensor.  Still worth it to us to fix it.)  Anything as
complex as staining and coverslipping robots will be fussy from time to
time.  But I love my Leica!

Kathleen

Principal Lab Technician
Neurotoxicology Labs
Molecular Pathology Facility Core
Dept of Pharmacology & Toxicology
Rutgers, the State University of NJ
41 B Gordon Road
Piscataway, NJ 08854
(848) 445-1443
FAX (732) 445-6905

> We have both and love them both. IF you are using tape coverslips then 
> perhaps Sakura is your best bet. We use glass coverslips on BOTH the
Leica
> and Sakura and find fewer problems with the Leica.
>
> -----Original Message-----
> From: histonet-bounces <@t> lists.utsouthwestern.edu
> [mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of
Contact
> HistoCare
> Sent: Wednesday, March 20, 2013 6:49 PM
> To: histonet <@t> lists.utsouthwestern.edu
> Subject: [Histonet] H&E Stainer Leica vs Sakura (Sophia Lin)
>
> Both stainers are powerhouses. The Leica has a plain menu screen with
a
> simple interface while the Sakura has a LCD screen with detailed 
> information about what stage the staining process a rack is along with 
> multiple menus.  The difference between the performance changes 
> drastically when the respective coverslipper attachments become
involved.
>
> The Leica is seriously no match for the Sakura in this respect. The 
> Leica's coverslipper is its Achilles heel and requires a LOT more 
> attention and alerts frequently, very frequently. It takes a separate
rack
> for staining the slides at the beginning of the process and eventually 
> transfers them to a different rack one the cover slip is complete.
This
> one uses glass and frequently drops glass, creates bubbles, drops and 
> breaks slides. You will have to frequently purge the system and clean
the
> cover medium needle dropper.  Once done, it only holds. Two racks of
30
> slides and will alert until you remove it. You can't leave this one
alone
> for more than 5 minutes without an alert. Seriously.
>
> The Sakura's coverslipper uses cover tape which won't need to be
replaced
> not even remotely as soon as the glass in the Leica.  Finished slides 
> remain in a carousel at the top and can hold about 10 racks of 20
before
> it alerts. For high volume, the Sakura pair wins hands down. You won't 
> lose productivity time by needing to check on this machine pair.
>
> HistoCare.com
>
>
>
>
>
>
> Hi,
>
> We are currently looking to switch out our linear MKII stainer for
either
> a Leica XL autostainer or the Sakura Tissue-Tek Prisma. Any 
> recommendations?
> Are quantity of H&Es is increasing and we need adequate equipment to
meet
> our workload. The incorporated oven seems excellent on both stainers.
Any
> pros/cons would be greatly appreciated! Also, if you are currently
using
> the stainer, does it meet your workload and what is your volume?
>
> Thanks!
>
> Sophia
> _______________________________________________
> Histonet mailing list
> Histonet <@t> lists.utsouthwestern.edu
> http://lists.utsouthwestern.edu/mailman/listinfo/histonet
>
> _______________________________________________
> Histonet mailing list
> Histonet <@t> lists.utsouthwestern.edu
> http://lists.utsouthwestern.edu/mailman/listinfo/histonet
>




_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


The information contained in this e-mail message is intended only for the
personal and confidential use of the recipient(s) named above. If the reader
of this message is not the intended recipient or an agent responsible for
delivering it to the intended recipient, you are hereby notified that you
have received this document in error and that any review, dissemination,
distribution, or copying of this message is strictly prohibited. If you have
received this communication in error, please notify us immediately by
e-mail, and delete the original message.

_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet




More information about the Histonet mailing list