[Histonet] Plastic/Plexiglass Incubation chamber for IHC slides

[Brent Heller]

Start heating.

-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu [mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Bea DeBrosse-Serra
Sent: Monday, July 08, 2013 11:57 AM
To: 'Walter Benton'; davidclark10 <@t> comcast.net; histonet <@t> lists.utsouthwestern.edu
Subject: RE: [Histonet] Plastic/Plexiglass Incubation chamber for IHC slides

We do IHC by hand most of the times..............

http://www.newcomersupply.com/products/slide-staining-trays-ihc

Bea

Beatrice DeBrosse-Serra HT(ASCP)QIHC
Isis Pharmaceuticals
Antisense Drug Discovery
2855 Gazelle Ct.
Carlsbad, CA 92010
760-603-2371




-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu [mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Walter Benton
Sent: Monday, July 08, 2013 11:20 AM
To: davidclark10 <@t> comcast.net; histonet <@t> lists.utsouthwestern.edu
Subject: RE: [Histonet] Plastic/Plexiglass Incubation chamber for IHC slides

http://www.ihcworld.com/products/IHC-Staining-System.htm

I have not used, but it seems that it would work like the old ones.

Walter Benton HT(ASCP)QIHC
Histology Supervisor
Chesapeake Urology Associates
806 Landmark Drive, Suite 127
Glen Burnie, MD 21061
443-471-5850 (Direct)
410-768-5961 (Lab)
410-768-5965 (Fax)
ChesapeakeUrology.com

Voted a Best Place to Work by
Baltimore and Modern Healthcare
Magazines.
________________________________________
From: histonet-bounces <@t> lists.utsouthwestern.edu [histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of davidclark10 <@t> comcast.net [davidclark10 <@t> comcast.net]
Sent: Monday, July 08, 2013 2:10 PM
To: histonet <@t> lists.utsouthwestern.edu
Subject: [Histonet] Plastic/Plexiglass Incubation chamber for IHC slides

Hi Histonetters,


I hope you all had a wonderful Independence Day!


Do you guys remember in the olden days before automation when we did IHC by hand?


I'm looking for an incubation chamber that allows us to incubate our slides overnight. The one I have right now is about 20x6x6 with a lid


and allows for about 4 flat racks of slides to be placed inside. Any information would be appreciated either if you have one or know of a company that can make one.


Cheers!


David Clark
Oregon Health & Science University
Portland, Oregon
_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

CONFIDENTIALITY NOTICE: The information contained in this electronic message is intended solely for the personal and confidential use of the designated recipient(s) named above and may contain information that is protected from disclosure under applicable law.  If you are not the intended recipient, or the employee or agent responsible for delivering it to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this transmission is strictly prohibited. If you have received this transmission in error, please notify the transmitting person/department immediately by email or telephone (410) 581-5881 and delete the message without making a copy.

_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet