[Histonet] RE: Metal molds

Wed Oct 10 13:34:13 CDT 2012

You all have me starving..

But I believe the manufacture recommends that cassettes not be cleaned in the processor - sticky valves being the reason.

We haven't cleaned cassettes in years or used mold release. They go back in the embedding center hot compartment - standing on edge. I ask frequently, but we have no issues with floaters.

But I USED to clean - thought it had to be done - boiled in soap let cool, rinsed, dried, choked to death on mold release spray.. all the good stuff. Just had to listen to coworkers that had a different experience!!

Joyce Weems
Pathology Manager
678-843-7376 Phone
678-843-7831 Fax
joyce.weems <@t> emoryhealthcare.org

www.saintjosephsatlanta.org
5665 Peachtree Dunwoody Road
Atlanta, GA 30342

This e-mail, including any attachments is the property of Saint Joseph's Hospital and is intended for the sole use of the intended recipient(s).  It may contain information that is privileged and confidential.  Any unauthorized review, use, disclosure, or distribution is prohibited. If you are not the intended recipient, please delete this message, and reply to the sender regarding the error in a separate email.

-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu [mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of O'Donnell, Bill
Sent: Wednesday, October 10, 2012 2:19 PM
To: joelle weaver; brendal.finlay <@t> medicalcenterclinic.com; histonet <@t> lists.utsouthwestern.edu
Subject: RE: [Histonet] RE: Metal molds

Actually, the thread began because our VIP rotary valve got filled with wax and required service. We clean daily in VIP, but wanted to know what others were doing. Mostly, people are using the VIP, so we may need to modify our regularity or change out cleaning solution more frequently.

I do like where the thread has gone. I got my (chicken fryer) cast iron skillet from my mother who got it from her mother. They were migrant workers during the dust bowl,  picking cotton in Texas and oranges in California before settling in Arizona. I remember Mom frying chicken (or the occasional rabbit) in it on Sunday mornings. Yes, I still use it, but I have added several other cast iron pieces to the arsenal including a bread pan! There will be pound cake in the oven tonight!

William (Bill) O'Donnell, HT (ASCP) QIHC Senior Histologist Good Samaritan Hospital
10 East 31st Street
Kearney, NE 68847

SERENITY is not freedom from the storm, but peace amid the storm.

Cultivate it in PRAYER!

-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu
[mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of joelle weaver
Sent: Wednesday, October 10, 2012 12:42 PM
To: brendal.finlay <@t> medicalcenterclinic.com;
histonet <@t> lists.utsouthwestern.edu
Subject: RE: [Histonet] RE: Metal molds

My impression of the intial thread was the general cleanliness and cross contamination potential, not the fact that the blocks aren't easily released. I have never had that issue.

Joelle Weaver MAOM, HTL (ASCP) QIHC
 > Date: Wed, 10 Oct 2012 09:27:09 -0500
> From: brendal.finlay <@t> medicalcenterclinic.com
> To: histonet <@t> lists.utsouthwestern.edu
> Subject: RE: [Histonet] RE: Metal molds
>
>
> We clean molds every day.  My preferred method is heated water to melt

> the paraffin off, then allow to cool.  Peel the paraffin from the
> surface of the water, remove the molds from the water, then dunk them
> about 10 times in a mixture of alcohol and mold release.  Allow to air

> dry or dry in a low temp oven.
>
>
> In my experience, molds that aren't cleaned on a regular basis make it

> very difficult to remove the embedded cassettes even if very, very
> cold.  It's easier for me if my workspace and tools are clean and
> organized.
>
>
> -----Original message-----
> From: Susan.Walzer <@t> HCAHealthcare.com
> Date: Wed, 10 Oct 2012 01:00:50 -0500
> To: joelleweaver <@t> hotmail.com, valerie.hannen <@t> parrishmed.com
> Subject: RE: [Histonet] RE: Metal molds
>
> > We put our molds in the VIP before running the cleaning cycle daily.
> Then we dip them in alcohol containing mold release..air dry and
> store.
> >
> > -----Original Message-----
> >From: histonet-bounces <@t> lists.utsouthwestern.edu
> [mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of joelle

> weaver
> > Sent: Tuesday, October 09, 2012 3:27 PM
> > To: valerie.hannen <@t> parrishmed.com
> > Cc: histonet <@t> lists.utsouthwestern.edu
> > Subject: RE: [Histonet] RE: Metal molds
> >
> >
> > I always cleaned them daily, either the very hot water, soapy water
> method, with water running over them in the sink with them on their
> sides so it passes over them, not upright so the water sits in them-
> then a rinse in alcohol and completely air dry. Or you can always do
> the clean cycle with the racks, running them through xylene, etc. They

> come out very clean this way- used an old processor that was a backup
> for this most of the time. But I always did them daily, but also wiped

> each one out with gauze if I used them twice in an embedding session (

> for more than one specimen in that large batch). Also I like metal, I
> hate those plasticones. If you keep the block face surface of the mold

> warm-hot, and flatten before it turns completely white the specimen is

> at the surface and you are able to see the edges easily without a lot
> of "facing". I think this saves time cutting through paraffin, and
> saves blades. Plus if the specimen is not flat enough, you see it
> right away and know if you must re-embed to get a complete,
> representative section, rather than after you have cut some
> superficial parts of some edges away and not others, only to have to
> re-embed anyhow. The other problems I see are when people are "afraid"
> of big molds- please if you are only taking one section, use one large

> enough to leave a perimeter. Don't try to squeeze it into a medium
> mold, you are unlikely to need multiple sections on one slide and it
> is much easier to get flat and get a good section. Also please put
> enough paraffin on top, so that when it is cool the layer over the
> grooves in the cassette is not so thin that youcan clearly see the
> depressions. That little bit of paraffin is much cheaper than tech
> time in re-embedding and fussing with a block longer than you should.
> Not so much a big issue for many specimens, but anything hard/ dense,
> such as bone, cervix, uterus, leeps, ( you get the idea) it is not
> anchored enough without a good dose of paraffin, causing more chatter
> when you section, and maybe chipping out more frequently, or even the
> whole bottom surface to lift off the cassette. I guess I have some
> "pet peeves" with this topic, so thanks for letting me get that out!
> >
> >
> >
> >
> > Joelle Weaver MAOM, HTL (ASCP) QIHC
> > > From: Valerie.Hannen <@t> parrishmed.com
> > > To: billodonnell <@t> catholichealth.net;
> histonet <@t> lists.utsouthwestern.edu
> > > Date: Tue, 9 Oct 2012 10:51:01 -0400
> > > CC:
> > > Subject: [Histonet] RE: Metal molds
> > >
> > > We clean our molds once a week. Soakthem in Xylene to remove
> paraffin, soak in 100% alcohol to remove xylene, rinse in running
> water, dry and spray with mold release solution.
> > >
> > > Valerie A. Hannen, MLT(ASCP),HTL,SU(FL) Histology Section Chief
> > > Parrish Medical Center
> > > 951 N. Washington Ave.
> > > Titusville, Florida 32976
> > > Phone:(321) 268-6333 ext. 7506
> > > Fax: (321) 268-6149
> > > valerie.hannen <@t> parrishmed.com
> > >
> > >
> > > -----Original Message-----
> > > From: histonet-bounces <@t> lists.utsouthwestern.edu
> [mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of
> O'Donnell, Bill
> > > Sent: Monday, October 08, 2012 4:32 PM
> > > To: histonet <@t> lists.utsouthwestern.edu
> > > Subject: [Histonet] Metal molds
> > >
> > >
> > > OK folks, I know I should be smarter than this and I haven't seen
> discussion on itlately....
> > >
> > > Are people cleaning their metal embedding molds after evey
> embedding session?
> > >
> > > If not, how often do you clean them?
> > >
> > > Do you clean them at all?
> > >
> > > If you clean them, how do you do it?
> > >
> > > Thanks
> > >
> > > Bill
> > > William (Bill) O'Donnell, HT (ASCP) QIHC Senior Histologist Good
> Samaritan Hospital 10 East 31st Street Kearney, NE 68847
> > >
> > > SERENITY is not freedom from the storm, but peace amid the storm.
> > >
> > > Cultivate it in PRAYER!
> > >
> > >
> > >
> > >
> > > This electronic mail and any attached documents are intended
> solely for the named addressee(s) and contain confidential
> information. If you are not an addressee, or responsible for
> delivering this email to an addressee, you have receivedthis email in
> error and are notified that reading, copying, or disclosing this email

> is prohibited. If you received this email in error, immediately reply
> to the sender and delete the message completely from your computer
> system.
> > >
> > > _______________________________________________
> > > Histonet mailing list
> > > Histonet <@t> lists.utsouthwestern.edu
> > > http://lists.utsouthwestern.edu/mailman/listinfo/histonet
> > >
> > > =============
> > > "This email is intended solely for the use of the individual to
> > > whom it is addressed and may contain information that is
> > > privileged, confidential or otherwise exempt from disclosure under

> > > applicable law. If the reader of this email is not the intended
> > > recipient or the employee or agent responsible for delivering the
> > > message to the intended recipient, you are herebynotified that any

> > > dissemination, distribution, or copying of this communication is
> > > strictly prohibited. If you have received this communication in
> > > error, please immediately delete this message. Thank you"
> > > =============
> > >
> > > _______________________________________________
> > > Histonet mailing list
> > > Histonet <@t> lists.utsouthwestern.edu
> > > http://lists.utsouthwestern.edu/mailman/listinfo/histonet
> > _______________________________________________
> > Histonet mailing list
> > Histonet <@t> lists.utsouthwestern.edu
> > http://lists.utsouthwestern.edu/mailman/listinfo/histonet
> >
> > _______________________________________________
> > Histonet mailing list
> > Histonet <@t> lists.utsouthwestern.edu
> > http://lists.utsouthwestern.edu/mailman/listinfo/histonet
> >
>
> Brendal C. Finlay, HT (ASCP)
>
> _______________________________________________
> Histonet mailing list
> Histonet <@t> lists.utsouthwestern.edu
> http://lists.utsouthwestern.edu/mailman/listinfo/histonet

_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

This electronic mail and any attached documents are intended solely for the named addressee(s) and contain confidential information. If you are not an addressee, or responsible for delivering this email to an addressee, you have received this email in error and are notified that reading, copying, or disclosing this email is prohibited. If you received this email in error, immediately reply to the sender and delete the message completely from your computer system.

_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

________________________________

This e-mail message (including any attachments) is for the sole use of
the intended recipient(s) and may contain confidential and privileged
information. If the reader of this message is not the intended
recipient, you are hereby notified that any dissemination, distribution
or copying of this message (including any attachments) is strictly
prohibited.

If you have received this message in error, please contact
the sender by reply e-mail message and destroy all copies of the
original message (including attachments).