[Histonet] RE: Metal molds

[Goins, Tresa]

Dag' nabbit'  Now I'm hungry . . . 

Tresa

-----Original Message-----
From: Blazek, Linda [mailto:lblazek <@t> digestivespecialists.com] 
Sent: Wednesday, October 10, 2012 11:38 AM
To: 'Bartlett, Jeanine (CDC/OID/NCEZID)'; Fred Underwood; histonet <@t> lists.utsouthwestern.edu; Brendal Finlay; Goins, Tresa
Subject: RE: [Histonet] RE: Metal molds

Ok....  that did it...  I'm going home and making cornbread, hash browns with onions, sausage and green pepper.

-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu [mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Bartlett, Jeanine (CDC/OID/NCEZID)
Sent: Wednesday, October 10, 2012 1:30 PM
To: Fred Underwood; histonet <@t> lists.utsouthwestern.edu; Brendal Finlay; Tresa Goins
Subject: RE: [Histonet] RE: Metal molds

I'm thinking some cracklin cornbread!

Jeanine H. Bartlett
Centers for Disease Control and Prevention Infectious Diseases Pathology Branch
404-639-3590
jeanine.bartlett <@t> cdc.hhs.gov

-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu [mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Fred Underwood
Sent: Wednesday, October 10, 2012 1:29 PM
To: histonet <@t> lists.utsouthwestern.edu; Brendal Finlay; Tresa Goins
Subject: RE: [Histonet] RE: Metal molds

You're making me hungry Tresa.  I bet that skillet makes a killer batch of hash browns.

>>> "Goins, Tresa" <TGoins <@t> mt.gov> 10/10/2012 12:53 PM >>>
I knew I might catch some grief for not cleaning our molds for five years, but my workplace is clean and organized.

Some things just work better without being cleaned with soap and water
- I have a fifteen year old cast iron skillet that is as non-stick as Teflon due to a natural patina - maybe the paraffin blocks easy release from my "un-clean molds* works for the same reason.

Tresa

-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu
[mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Brendal Finlay
Sent: Wednesday, October 10, 2012 8:27 AM
To: histonet <@t> lists.utsouthwestern.edu
Subject: RE: [Histonet] RE: Metal molds


We clean molds every day.  My preferred method is heated water to melt the paraffin off, then allow to cool.  Peel the paraffin from the surface of the water, remove the molds from the water, then dunk them about 10 times in a mixture of alcohol and mold release.  Allow to air dry or dry in a low temp oven.


In my experience, molds that aren't cleaned on a regular basis make it very difficult to remove the embedded cassettes even if very, very cold.
 It's easier for me if my workspace and tools are clean and organized.


_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet