[Histonet] RE: Slide printing systems

Wed Aug 15 11:15:05 CDT 2012

We are getting the PrintMate and SlideMate for our lab very soon.  What brand of slides are you using that works best?  Are they white slides or colored? 
Thank you in advance for your input. 

Carol 

-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu [mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Walter Benton
Sent: Wednesday, August 15, 2012 12:03 PM
To: Elizabeth Chlipala; 'Bell, Pat'; 'Mitchell, Janice A'; histonet <@t> lists.utsouthwestern.edu
Subject: [Histonet] RE: Slide printing systems

I too have the same systems that are being referenced. The Printmate did have a ton of problems with the original print heads, however they are doing a sweep to replace all of them according to my rep. We no longer experience the broken pins or other associated issues with the Print Mate.

As for the slide mate, we had similar issues with that as well and found that after it was serviced a second time that we needed upgraded software/firmware on the instrument itself. Another issue that goes untouched by many users is the advanced user menu, which controls the pressure in which the thermal head presses on the slides and a variety of other attributes. Most reps are not aware of these features and thus are unable to help resolve your issues. Once we found out about these settings our slidemates work great.

In addition to the advance settings on the slide mate it is important to wipe the thermal print head with an alcohol wipe daily to keep it clean performing optimally. Another issue that I have witnessed is that some of the paint on some slides do not work as well as others. I recently tested a slide with paint specifically formulated for the slide mate and the print was the best I have ever seen.

Overall the units work well provided they are maintained and you have a knowledgeable support person to help you test out some of the advance menu features.

Walter Benton HT(ASCP)QIHC
Histology Supervisor
Chesapeake Urology Associates
806 Landmark Drive, Suite 126
(All Deliveries to Suite 127)
Glen Burnie, MD 21061
443-471-5850 (Direct)
410-768-5961 (Lab)
410-768-5965 (Fax)
wbenton <@t> cua.md
________________________________________
From: histonet-bounces <@t> lists.utsouthwestern.edu [histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Elizabeth Chlipala [liz <@t> premierlab.com]
Sent: Wednesday, August 15, 2012 11:28 AM
To: 'Bell, Pat'; 'Mitchell, Janice A'; histonet <@t> lists.utsouthwestern.edu
Subject: [Histonet] RE: Slide printing systems

We had the slide mate and we do not use it any more, its worthless.

Liz

Elizabeth A. Chlipala, BS, HTL(ASCP)QIHC
Manager
Premier Laboratory, LLC
PO Box 18592
Boulder, CO 80308-1592
(303) 682-3949 office
(303) 682-9060 fax
(303) 881-0763 cell
www.premierlab.com

Ship to address:

1567 Skyway Drive, Unit E
Longmont, CO 80504

-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu [mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Bell, Pat
Sent: Wednesday, August 15, 2012 9:26 AM
To: 'Mitchell, Janice A'; histonet <@t> lists.utsouthwestern.edu
Subject: [Histonet] RE: Slide printing systems

I also have the slide-mate and have a lot of problems with the printing. We also have to spend a lot of time rewriting and labeling them. I have been told to send it in to get it repaired but I wonder if it is worth the time and money if you are getting it back in basically the same condition! I know the Leica is pretty good but I am in research and can't spend that kind of money. I wish there was a system that was good and not extremely expensive.

Pat Bell HT(ASCP)
University of Colorado, Denver
Medical Oncology; MS 8117
12801 E 17th Ave.
RC1-S, L18-8402C
Aurora, Co. 80045
303-724-6077
pat.bell <@t> ucdenver.edu

-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu [mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Mitchell, Janice A
Sent: Wednesday, August 15, 2012 8:25 AM
To: histonet <@t> lists.utsouthwestern.edu
Subject: [Histonet] Slide printing systems

Good Morning,

We currently are using Thermo-Fisher print-mate and slide-mate.  I am not very happy with the printing of the slides.  Some days I feel like spend most of my time re-writing and labeling printed slides. Then when the units  are  sent out for repair and it arrives back it is not a whole lot better.  Before we get our new LIS system and our Docs will be scanning the bar code(that sometimes do not print) I need to find a better system.  I will not be able to deal with how often my name will be called out when the scanning of the slides fail.

I would like any input on other systems pros and cons that are currently being used in histology labs.   I know no system will be perfect but something has to be better.

Thanks, Janice

Janice A. Mitchell, BS, HT(ASCP)
Histology Lead Tech
Children's Hospital of Philadelphia
Anatomic Pathology and Laboratory Medicine
324 S. 34th Street
Philadelphia, Pa 19104-4399
215-590-1738(lab)
267-426-7754(office)

_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

CONFIDENTIALITY NOTICE: The information contained in this electronic message is intended solely for the personal and confidential use of the designated recipient(s) named above and may contain information that is protected from disclosure under applicable law.  If you are not the intended recipient, or the employee or agent responsible for delivering it to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this transmission is strictly prohibited. If you have received this transmission in error, please notify the transmitting person/department immediately by email or telephone (410) 581-5881 and delete the message without making a copy.

_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

NOTICE OF CONFIDENTIALITY

This message, including any attachments, is intended only for the sole use of the addressee and may contain confidential or privileged information that is protected by the State of Kentucky and/or Federal regulations.  If you are not the intended recipient, do not read, copy, retain or disseminate this message or any attachment. If you have received this message in error, please call the sender immediately at (859)258-4000 and delete all copies of this message and any attachment. Any unauthorized review, use, disclosure, copying or distribution is strictly prohibited.  Neither the transmission of this message or any attachment, nor any error in transmission or misdelivery shall constitute waiver of any applicable legal privilege. 