[Histonet] micro wave processors

[SHANE NELSON]

You will always have a recommended protocol. It is up to us as HT/HTL  to determine what exactly will work. That is where TROUBLE SHOOTING falls in.
As I posted earlier, I use a certain type of microwave processor and because the recommended temps did not work on the type of tissue I was processing. I had to trouble shoot for what would work.
Again, my paraffin temps do not exceed 67C.

THANK YOU,
 
PATTI RUBEN-NELSON  H.T.(ASCP) 
PNP LABORATORY CONSULTANTS
SUPERVISOR/DGC
P.O. BOX 412
CABAZON, CA. 92230
cell (909) 841-9761 
nelsonrnch <@t> verizon.net
 
 
CONFIDENTIALITY NOTICE:
This message and any included attachments are from Patti Nelson, PNP Laboratory Consultants 
 and are intended only for the addressee.  The information contained in this message is confidential and may contain privileged, confidential, proprietary and/or exemption from disclosure under applicable
law.  Unauthorized forwarding, printing, copying, distribution, or use of
such information is strictly prohibited and may be unlawful.  If you are not
the addressee, please promptly delete this message and notify the sender of
the delivery error by e-mail or you may call  909-841-9761.


________________________________
From: jose and leticia alvarez <alvarez092703 <@t> hotmail.com>
To: histonet <@t> lists.utsouthwestern.edu
Sent: Tuesday, November 8, 2011 8:05 AM
Subject: [Histonet] micro wave processors





I am in a mirotomy class, and we had a discussion about mircorwave processing.  We need an accurate temperature.  Freida states it should be at 84 degrees however we think she is incorrect.  please respond asap. thank you leticia alvarez                          _______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet