[Histonet] brain sections cut on Cryo Jane apparatus are falling off slides during ethanol series for a cresyl stain

Kim Merriam kmerriam2003 <@t> yahoo.com
Mon Dec 12 07:09:36 CST 2011


I was having similar issues with frozen rat and human cartilage with the cryojane.  After a lot of trial and error; I have found that the 4X slides and air-drying overnight has worked extremely well for us.  The tissues never fall off any more!
 
Good luck,
Kim

Kim Merriam, MA, HT(ASCP)QIHC
Cambridge, MA


________________________________
From: "Connolly, Brett M" <brett_connolly <@t> merck.com>
To: Douglas M Burns <dmburns9 <@t> gmail.com>; "histonet <@t> lists.utsouthwestern.edu" <histonet <@t> lists.utsouthwestern.edu> 
Sent: Thursday, December 8, 2011 9:46 PM
Subject: RE: [Histonet] brain sections cut on Cryo Jane apparatus are falling off slides during ethanol series for a cresyl stain

Doug,
Hopefully you are using the CryoJane slides (not the subbed slides) and the UV glue activator and keeping both slides and tape cold in the cryostat. Be aware that you can get CryoJane slides with different amounts of adhesive (0.5-4x).  I would suggest going to the 4x slides. When peeling the tape off I pull it slowly and evenly almost back on itself at an acute angle- this greatly reduces the incidence of the section coming off with the tape... Haven't had a problem with section detachment in ethanols.

Brett

Brett Connolly, Phd
Merck Research Labs
West Point, PA

________________________________________
From: histonet-bounces <@t> lists.utsouthwestern.edu [histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Douglas M Burns [dmburns9 <@t> gmail.com]
Sent: Thursday, December 08, 2011 5:29 PM
To: histonet <@t> lists.utsouthwestern.edu
Subject: [Histonet] brain sections cut on Cryo Jane apparatus are falling off slides during ethanol series for a cresyl stain

Hello, Histo-users,

    Follow-up to our original posting about fixed-brain cryosections
falling off of subbed slides. We fished out our Cryo-Jane apparatus, and
using this apparatus has resulted in a great improvement in sections and
getting sections stuck onto the slides. This works pretty well until we
start using the ethanol series to dehydrate and delipidate before a Crystal
violet stain for Nissl bodies. (That is, for acqueous steps everything
seems to stay glued to the slide; however, once ethanols are involved
pieces start to come off.)

      To summarize, we are trying to go from cut blocks of
paraformaldehyde-fixed brain infused with sucrose and then frozen at -80.
We take them out, unfrozen, and cut them on a Leica cryostat. Early
attempts with subbed slides did not work reliably, so we have turned to
'Jane. Jane is slightly slower than a brush, and seems to work fairly well.
However, we have had trouble with the tape pulling parts of sections off of
the glued slides. When we introduce the nonacqeous solvents, our problems
become more obvious.

      We  have not so far gone to a post-fix, because we wanted to
simplify the overall process. Could  this be the mistake?

      We want to use IHC for c-Fox and possibly orexin - and similar - but
we want cresyl-stain to locate positively the area of interest in the cut
block.

      Any suggestions?  Also, are there any 'Jane enthusiasts out there?

                            thank  you in advance  ---------------  Doug
Burns, Kansas City
_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
Notice:  This e-mail message, together with any attachments, contains
information of Merck & Co., Inc. (One Merck Drive, Whitehouse Station,
New Jersey, USA 08889), and/or its affiliates Direct contact information
for affiliates is available at 
http://www.merck.com/contact/contacts.html) that may be confidential,
proprietary copyrighted and/or legally privileged. It is intended solely
for the use of the individual or entity named on this message. If you are
not the intended recipient, and have received this message in error,
please notify us immediately by reply e-mail and then delete it from 
your system.


_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


More information about the Histonet mailing list