[Histonet] cryostat help please!

[mohamed abd el razik]

our cryostat is 
Minotome Plus 
Microtome Cryostat
Cat. No. 2563-- For 120 VAC, 60Hz
 

--- On Sat, 3/20/10, Cheryl Cornett-Early <cornettearley <@t> bellsouth.net> wrote:


From: Cheryl Cornett-Early <cornettearley <@t> bellsouth.net>
Subject: Re: [Histonet] cryostat help please!
To: "mohamed abd el razik" <k84as <@t> yahoo.com>
Date: Saturday, March 20, 2010, 10:59 PM







Hi Mohamed,
             I AM a Services guy and this problem sounds like a loss of refrigerant I come across this problem on older Cryostat's after they have been turned off regularly, What  model of cryostat is it?. IT sounds like a CM1800 Riechet Jung or (Leica).
Best regards
Brian.
My territory is the south east, GA, AL, TN, SC, NC,

--- On Sat, 3/20/10, mohamed abd el razik <k84as <@t> yahoo.com> wrote:


From: mohamed abd el razik <k84as <@t> yahoo.com>
Subject: [Histonet] cryostat help please!
To: histonet <@t> lists.utsouthwestern.edu
Date: Saturday, March 20, 2010, 9:30 AM


hi all histoneters 
i have learned alot from your posts and i need any suggestion about a cryostat that was
working perfectly until the power cable is pluged off accidently. then after about 2 days i put it again in the power and all is working with its motor sound but no refregration and room temp. not decrease under 20 degrees!!! i let it for aweek but no change!  unfortene the technical service may take long time till it come to see the proplem as it is in a national university ( routine work) and i hope i could do that. any suggestion please?

Histonet <@t> lists.utsouthwestern.edu


_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet