[Histonet] Frozen Sections Slides per Day Question

Rene J Buesa rjbuesa <@t> yahoo.com
Mon Feb 8 11:57:01 CST 2010


The "norm" is 2 (max. 3) slides per case.
Your figure of 25 FS in 8 hours = 19.2 min/FS but you do a lot more that just 2-3 slides/case.
René J

--- On Mon, 2/8/10, soofia siddiqui <soofias2 <@t> yahoo.com> wrote:


From: soofia siddiqui <soofias2 <@t> yahoo.com>
Subject: RE: [Histonet] Frozen Sections Slides per Day Question
To: "tahseen <@t> brain.net.pk" <tahseen <@t> brain.net.pk>, "Barry RRittman" <Barry.R.Rittman <@t> uth.tmc.edu>, "Rene J Buesa" <rjbuesa <@t> yahoo.com>
Cc: "histonet <@t> lists.utsouthwestern.edu" <histonet <@t> lists.utsouthwestern.edu>
Date: Monday, February 8, 2010, 11:31 AM







Hi all,
Thank you so much! for all of your suggestions. 
 
 Rene,
How many slides per case, if FS standard is 15 min/case?
 
Thanks again. 
 
Soofia
--- On Sat, 2/6/10, Rene J Buesa <rjbuesa <@t> yahoo.com> wrote:


From: Rene J Buesa <rjbuesa <@t> yahoo.com>
Subject: RE: [Histonet] Frozen Sections Slides per Day Question
To: "tahseen <@t> brain.net.pk" <tahseen <@t> brain.net.pk>, "soofia siddiqui" <soofias2 <@t> yahoo.com>, "Barry RRittman" <Barry.R.Rittman <@t> uth.tmc.edu>
Cc: "histonet <@t> lists.utsouthwestern.edu" <histonet <@t> lists.utsouthwestern.edu>
Date: Saturday, February 6, 2010, 9:19 AM







FS standard is 15 minutes/case.
René J.

--- On Sat, 2/6/10, Rittman, Barry R <Barry.R.Rittman <@t> uth.tmc.edu> wrote:


From: Rittman, Barry R <Barry.R.Rittman <@t> uth.tmc.edu>
Subject: RE: [Histonet] Frozen Sections Slides per Day Question
To: "tahseen <@t> brain.net.pk" <tahseen <@t> brain.net.pk>, "soofia siddiqui" <soofias2 <@t> yahoo.com>
Cc: "histonet <@t> lists.utsouthwestern.edu" <histonet <@t> lists.utsouthwestern.edu>
Date: Saturday, February 6, 2010, 8:03 AM


While I no longer cut frozen sections, I did so for several years.
The number of blocks and sections you cut depends on so many factors including the type of tissue sectioned,  changing knife and roll plate positions, time to seal and store blocks after cutting, your expertise  etc.
So that, depending on circumstances, the number can vary considerably from lab to lab.
What mostly concerned me about your email was that you would be doing this all day.
There are so many injuries that can be caused by repetitive tasks in histology, most commonly cutting of frozen and paraffin wax sections.
Apart from this is the potential for errors that occur with continuous repetitive tasks and increases with the length of time period in which these are done..
I would recommend that multitasking with some other tasks alternating with the frozen sections
Just my opinion.
Barry

________________________________________
From: histonet-bounces <@t> lists.utsouthwestern.edu [histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of tahseen <@t> brain.net.pk [tahseen <@t> brain.net.pk]
Sent: Saturday, February 06, 2010 3:38 AM
To: soofia siddiqui
Cc: histonet <@t> lists.utsouthwestern.edu
Subject: Re: [Histonet] Frozen Sections Slides per Day Question

Dear Soofia Sissiqui,
25 blocks (12 slides for each block with 3-4 sections)as per Welcan Units
code # 5019 entire day ( 8 hours 480 minte)
Muhammad Tahseen
Histology Supervisor
SKMTH&RC Lahore Pakistan


> Hi dear histology experts,
> I will greatly appreciate if somebody can let me know the estimated number
> of slides (with 3 sections per slide) per day on average a lab technician
> can cut (of frozen tissue).
>
> I am a lab technician ( not a histotech) and work alone in a highly
> complex testing specialzed low volume dermatology lab.My job
> description includes 30 % of immunohistochemistry related dutites.  I cut
> skin frozen sections and do immunohistochemistry  manually for several
> years . My routiene panel consists of 12 antibodies for  T-cells  surface
> markers. Ocassionally  I add another panel of 8 antibodies for B-Cells.
> I am very slow in cutting sections and strugle a lot to get good sections.
> If I spend entire day ( 8 hours) just  cutting  3-4 section on each slide
> with slow speed. What  number of slides should be considered as efficent
> cutting?
> What number of blocks (12 slides for each block with 3-4 sections) should
> I finish in one day?
>
> Help me please if you can. Thanks. Soofia
>
>
>
>
> _______________________________________________
> Histonet mailing list
> Histonet <@t> lists.utsouthwestern.edu
> http://lists.utsouthwestern.edu/mailman/listinfo/histonet
>



_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet





      


More information about the Histonet mailing list