[Histonet] Does anyone have any ideas on the use of softenerondecal blocks. Does this help 'soften' them? If so how?

Walzer Susan Susan.Walzer <@t> HCAHealthcare.com
Tue Oct 7 06:43:48 CDT 2008


We face the block and put it in a dish with rapid decal solution. For
tough blocks like uterus we soak them in a solution of water,
ammonia(which is great for bloody tissue) and liquid soap.

-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu
[mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Laurie
Reilly
Sent: Friday, October 03, 2008 7:58 PM
To: 'Piero Nelva'; histonet <@t> lists.utsouthwestern.edu
Subject: RE: [Histonet] Does anyone have any ideas on the use of
softenerondecal blocks. Does this help 'soften' them? If so how?

Floating the trimmed/faced block on the waterbath for 2 minutes helps.
Then put them on wet ice to cool.

Regards,   Laurie.

Mr. Laurie REILLY
Histopathology
School of  Veterinary and Biomedical Sciences
James Cook University
Townsville  Qld.  4811
Australia.

Phone 07 4781 4468

-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu
[mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Piero
Nelva
Sent: Friday, 3 October 2008 7:16 PM
To: histonet <@t> lists.utsouthwestern.edu
Subject: Re: [Histonet] Does anyone have any ideas on the use of
softener
ondecal blocks. Does this help 'soften' them? If so how?

Hi Sarah

I don't use a softener as such, but have had good results putting
trimmed 
blocks on a water soaked tissue on the bench for 30 min or so just
before 
cooling and sectioning. I find it is more effective than an ice bath at 
softening tissues.

REgards

Piero Nelva
Anatomical Pathology
Monash Medical Centre
Australia
----- Original Message ----- 
From: "SARAH REEVES" <SARAH.REEVES <@t> ekht.nhs.uk>
To: <histonet <@t> lists.utsouthwestern.edu>
Sent: Friday, October 03, 2008 12:34 AM
Subject: [Histonet] Does anyone have any ideas on the use of softener on

decal blocks. Does this help 'soften' them? If so how?


Does anyone have any ideas on the use of softener on decal blocks. Does
this

help 'soften' them? If so how?

Thanks in advance

Sarah


**********************************************************************
This email and any files transmitted with it are confidential and
intended
solely for the use of the individual or entity to whom they are
addressed.
Any views or opinions presented are solely those of the author and do
not necessarily represent those of East Kent Hospitals University NHS
Trust.

If
you are not the intended recipient, be advised that you have received
this email in error and that any use, dissemination, forwarding,
printing
or copying of this email is strictly prohibited.

If you have received this email in error please notify the system
manager at the following email address: root.postmaster <@t> ekht.nhs.uk

www.kentandmedway.nhs.uk

This footnote also confirms that although this email message has been
swept by MIMEsweeper for the presence of computer viruses, it is
strongly
recommended that you carry out your own virus scan of this
message and any attachments.

www.mimesweeper.com
**********************************************************************


_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


------------------------------------------------------------------------
----
----



No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.173 / Virus Database: 270.7.5/1704 - Release Date:
10/2/2008 
9:35 PM


_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet



More information about the Histonet mailing list