[Histonet] Stainless steel strainer

[Rene J Buesa]

Buy a solid plastic one and bore holes with a Dremel.
  René J.

Jackie M O'Connor <Jackie.O'Connor <@t> abbott.com> wrote:
  Plastic ones just don't cut it. The holes are too big. We're straining 
jars of complete rat necropsies, and some of the smaller organs would go 
through the holes. The mesh strainers we're using are perfect - but they 
corrode so fast.




"Horn, Hazel V" 
01/11/2008 11:51 AM

To
"Jackie M O'Connor" , 
, 

cc

Subject
RE: [Histonet] Stainless steel strainer






I bought a plastic one at Target...

Hazel Horn
Hazel Horn, HT/HTL (ASCP)
Supervisor of Histology
Arkansas Children's Hospital
800 Marshall Slot 820
Little Rock, AR 72202

phone 501.364.4240
fax 501.364.3912

visit us on the web at: www.archildrens.org

-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu
[mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Jackie M
O'Connor
Sent: Friday, January 11, 2008 11:38 AM
To: histonet <@t> lists.utsouthwestern.edu;
histonet-bounces <@t> lists.utsouthwestern.edu
Subject: [Histonet] Stainless steel strainer

Happy Friday. I'm looking for a vendor for large, about 7 inch,
stainless 
steel strainers, sieve, colander, whatever you want to call it. We
use 
them for draining formalin fixed tissue, and the local supermarket ones 
just keep corroding.
Any ideas?

Jackie O'
_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


       
---------------------------------
Be a better friend, newshound, and know-it-all with Yahoo! Mobile.  Try it now.