[Histonet] AutoStainer XL Tweaking

mari.ann.mailhiot <@t> leica-microsystems.com mari.ann.mailhiot <@t> leica-microsystems.com
Tue Oct 16 09:27:34 CDT 2007


Hi Sally

I will give you a call.

Best Regards

Mari Ann Mailhiot BA HT ASCP
Application Specialist
Leica Technical Assistance Center
800 248 0123 x7267
847 236 3063 fax
mari.ann.mailhiot <@t> leica-microsystems.com
www.leica-microsystems.com


                                                                           
             "Breeden, Sara"                                               
             <sbreeden <@t> nmda.nm                                             
             su.edu>                                                    To 
             Sent by:                  <histonet <@t> lists.utsouthwestern.edu> 
             histonet-bounces@                                          cc 
             lists.utsouthwest                                             
             ern.edu                                               Subject 
                                       [Histonet] AutoStainer XL Tweaking  
                                                                           
             10/16/2007 07:04                                              
             AM                                                            
                                                                           
                                                                           
                                                                           



I'm setting up my Leica AutoStainer XL and would appreciate any help
with tweaking the times.  I based my timing for the Autostainer on my
manual stain times but staining is not crisp and looks washed out.  Docs
say eosin is fine but cellular detail is foggy.  Here are my times:

XYL - 3 at 5 min each

100% reagent - 2 at 30 seconds each

95% reagent - 1 at 30 seconds

80% reagent - 1 at 30 seconds

DI water wash - 1 minute

Hematox (currently using Sigma) - 5 minutes

DI water wash - 1 minute

Acid Alcohol (1%) - one dip

DI water wash - 1 minute

Ammonia water - 15 seconds

DI water wash - 1 minute

80% reagent - 1 at 30 seconds

95% reagent - 1 at 30 seconds

Eosin (alcoholic) - 10 seconds

95% reagent - 1 at 30 seconds

100% reagent - 2 at 1 minute each

XYL - 3 at 1 minute each

I cut my acid alcohol time down from 15 seconds to one dip but it's
still taking a lot of hematoxylin off.  Should I try 0.5% acid alcohol?
I'm at a loss so far; different hematox? More time in ammonia water?  If
you use this Leica AutoStainer XL, could you offer some Handy Hints?  I
thank you SO much!



Sally Breeden, HT(ASCP)

NM Dept. of Agriculture

Veterinary Diagnostic Services

PO Box 4700

Albuquerque, NM  87106

505-841-2576



_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________



More information about the Histonet mailing list