[Histonet] RE: Histonet Bone Saws

[Prior, Andrew]

We use the Isomet Low Speed Saw from Beuhler. It's easy and safe to use
and causes little artefact in the bone. It has a water reservoir so
there is little dust produced, though it does splash a little sometimes.


Andrew Prior

Histologist
Smith &Nephew Research Centre
York Science Park
Heslington
York
YO10 5DF
UK
 
Andrew.Prior <@t> smith-nephew.com
 
01904 824022

------------------------------

>Message: 17
>Date: Thu, 4 Oct 2007 10:18:31 -0500
>From: Jackie M O'Connor <Jackie.O'Connor <@t> abbott.com>
>Subject: [Histonet] Bone Saws
>To: histonet <@t> lists.utsouthwestern.edu,
	histonet-bounces <@t> lists.utsouthwestern.edu
>Message-ID:
	
<OF5E528629.F83A7FB2-ON8625736A.0053D8E0-8625736A.0054235C <@t> abbott.com>
>Content-Type: text/plain; charset="US-ASCII"

>Does anyone have a suggestion for a good electric bone saw for
histology? 
>My intent is to trim un-decalcified  bone to 3mm to facilitate/speed up

>decalcification.
>Are there any rules governing bone dust?   I remember years ago, a 
>pathologist complaining that anything but a hacksaw creating a burning 
>artifact in the bone.
>Any thoughts on this?

>>Jackie

------------------------------

************************** 
Confidentiality. 
This electronic transmission is strictly confidential to Smith & Nephew and intended solely for the addressee. It may contain information which is covered by legal, professional or other privilege. If you are not the intended addressee, or someone authorised by the intended addressee to receive transmissions on behalf of the addressee, you must not retain, disclose in any form, copy or take any action in reliance on this transmission. If you have received this transmission in error, please notify the sender as soon as possible and destroy this message. 
 
Smith & Nephew UK Limited 
Registered in England and Wales No.4421171 with registered office at 15 Adam Street, London WC2N 6LA