[Histonet] Freaky Friday

[Mickie Johnson]

Our Biomed department at Sacred Heart used to do this also. They used an
Epoxy paint which held up for a few years. As the surface ages, bubbles are
more of a problem as the surface gets pitted. I think they may also have
baked it on a little, but not sure.

Mickie

Mickie Johnson, B.S., HTL(ASCP)
Mohs Histology Consulting Services, LLC
  & Mohs Lab Staffing
2507 S. Manito Blvd.
Spokane, WA 99203
509-954-7134
Web: www.mohshistotemp.com & www.mohslabstaffing.com 
Email: mickie25 <@t> netzero.net
 
 

-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu
[mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Joe Nocito
Sent: Friday, August 03, 2007 4:12 PM
To: Woodward, Denise; Breeden, Sara; histonet <@t> lists.utsouthwestern.edu
Subject: Re: [Histonet] Freaky Friday

I like Fred's idea the best, fire up the BBQ and tap a keg. OK gang, next 
Friday we all meet over Fred's place.

JTT
----- Original Message ----- 
From: "Woodward, Denise" <denise.woodward <@t> uconn.edu>
To: "Breeden, Sara" <sbreeden <@t> nmda.nmsu.edu>; 
<histonet <@t> lists.utsouthwestern.edu>
Sent: Friday, August 03, 2007 3:38 PM
Subject: RE: [Histonet] Freaky Friday


Many moons ago, when I worked at a small hospital, the biomedical
department was able to re-surface the inside of the flotation bath. When
he brought it back it looked like new.
I have no idea how he did it.  Anyone out there have a biomed pro they
can ask?
2 cents on a hot Friday,
Denise Long Woodward
UCONN

-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu
[mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Breeden,
Sara
Sent: Friday, August 03, 2007 2:41 PM
To: histonet <@t> lists.utsouthwestern.edu
Subject: [Histonet] Freaky Friday

The Friday Hour of Fuming is being replaced by Freaky Question Day.  Is
there a way to "re-blacken" the interior surface of a tissue flotation
bath?  I've thought about high-temp black spray paint (like for BBQs,
engine parts, etc.) and quickly decided it probably would have some
oddball reaction with the whole tissue-floating thing.  Any ideas out
there? And, no, I haven't asked the manufacturer - I'm just having my
own ideas.  And that's often a dangerous place to be!



Sally Breeden, HT(ASCP)

NM Dept. of Agriculture

Veterinary Diagnostic Services

PO Box 4700

Albuquerque, NM  87106

505-841-2576



_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet 


_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet