[Histonet] magnetized tissue??
Philip Oshel
oshel1pe <@t> cmich.edu
Fri Jul 14 07:16:28 CDT 2006
2 thoughts:
One, you always drop the sample into the melted paraffin
not-freshly-cut-end-first:
cut end > X====|
^ < held toward freshly cut end
So, the " | " end drops in first, vertically. Fluid dynamics will
quickly flip a long, thin sample like this, unless it goes in
vertically, so the freshly cut end lands pointing down.
Easily tested: hold some specimens at one end and note if they land
opposite-end down, then hold more specimens by the other end and
repeat. Hold some sideways, and see how they land -- sideways, or one
end perferentially.
If it's not that, I'd bet on a static charge. All of the materials
involved (specimen, paraffin) are insulators, so when you cut the end
of the sample, you could be generating a static charge. If the metal
embedding mold is on something conductive, or charged (-), and the
induced charge is (+), then this might be able to flip the specimen.
Assuming a dry, staticy environment.
This could be tested with an anti-static gun, and zapping the
specimen and mold.
So, how long before this shows up on a CAP inspection?
Phil
>I have noticed an odd phenomenon many times, so I assume others must have
>noticed it too? I often have slender, cylindrical specimens like vessels or
>mouse spinal cord that have to be cut in cross section and therefore have to
>be embedded "on end". Sometimes a specimen is a little too long to mount on
>end without the cassette resting on top of the specimen. In such cases I
>take a scalpel blade and trim a bit off the length, to make the specimen
>"shorter". When I take a specimen that has been trimmed in this way, and
>drop it back into the stainless steel embedding mold filled with paraffin,
>the specimen instantly flips around and attaches on end to the bottom of the
>mold, always by the freshly cut end, just as though it somehow became
>"magnetized" by my trimming it. Has anyone else observed this? (Please say
>yes, I can't be the only one!) If so, does anyone have any idea how/why
>this occurs? Obviously it is not true magnetism operating here because (1)
>tissue does not become magnetized, and (2) stainless steel is not attracted
>to a magnet.
>
>_______________________________________________
>Histonet mailing list
>Histonet <@t> lists.utsouthwestern.edu
>http://lists.utsouthwestern.edu/mailman/listinfo/histonet
--
Philip Oshel
Microscopy Facility Supervisor
Department of Biology
Central Michigan University
024C Brooks Hall
Mt. Pleasant, MI 48859
voice: (989) 774-3576
dept. fax: (989) 774-3462
More information about the Histonet
mailing list