[Histonet] Bone Saw

[Patsy Ruegg]

I have the Mar-med and have used it to cut some pretty large bones (human
heads of femur) you can adjust the table height or take it out so that
larger samples than you think can pass.
Patsy 


Patsy Ruegg, HT(ASCP)QIHC
IHCtech, LLC
Fitzsimmons BioScience Park
12635 Montview Blvd. Suite 216
Aurora, CO 80010
P-720-859-4060
F-720-859-4110
wk email pruegg <@t> ihctech.net
web site www.ihctech.net
 

This email is confidential and intended solely for the use of the Person(s)
('the intended recipient') to whom it was addressed. Any views or opinions
presented are solely those of the author. It may contain information that is
privileged & confidential within the meaning of applicable law. Accordingly
any dissemination, distribution, copying, or other use of this message, or
any of its contents, by any person other than the intended recipient may
constitute a breach of civil or criminal law and is strictly prohibited. If
you are NOT the intended recipient please contact the sender and dispose of
this e-mail as soon as possible.


-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu
[mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of DiCarlo,
Margaret
Sent: Friday, November 11, 2005 8:53 AM
To: 'Temple Nancy'; histonet <@t> lists.utsouthwestern.edu
Subject: RE: [Histonet] Bone Saw

I would also be interested in a heavy duty band saw since I work with large
human bones.  When I looked into the Mar-Med I felt it was not sturdy or
large enough to meet my lab needs.

I also would appreciate any suggestions.  

Peggy DiCarlo HT (ASCP)
Orthopedics Bone Lab
Buffalo General Hospital
100 High St.
Buffalo, NY  14203
716-859-1293
 


-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu
[mailto:histonet-bounces <@t> lists.utsouthwestern.edu]On Behalf Of Temple Nancy
Sent: Friday, November 11, 2005 08:47
To: histonet <@t> lists.utsouthwestern.edu
Subject: [Histonet] Bone Saw


We are currently using a bone saw made by Mar-Med. We do a lot of bones, and
are in need of a heavier duty bone saw. We have had to replace the motor
twice this year on the Mar-Med. Any suggestions?
Thanks,

Nancy
St. Francis Hospital
Indianapolis, In


The information contained in this e-mail and any accompanying documents is
intended for the sole use of the recipient to whom it is addressed, and may
contain information that is privileged, confidential, and prohibited from
disclosure under applicable law. If you are not the intended recipient, or
authorized to receive this on behalf of the recipient, you are hereby
notified that any review, use, disclosure, copying, or distribution is
prohibited. If you are not the intended recipients(s), please contact the
sender by e-mail and destroy all copies of the original message. Thank you.
_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet


CONFIDENTIALITY NOTICE: 
This email transmission and any documents, files, or previous e-mail
messages attached to it are confidential and intended solely for the use of
the individual or entity to whom they are addressed. 
If you are not the intended recipient, or a person responsible for
delivering it to the intended recipient, you are hereby notified that any
further review, disclosure, copying, dissemination, distribution, or use of
any of the information contained in or attached to this e-mail transmission
is strictly prohibited. 
If you have received this message in error, please notify the sender
immediately by e-mail, discard any paper copies, and delete all electronic
files of the message. If you are unable to contact the sender or you are not
sure as to whether you are the intended recipient, please e-mail
ISTSEC <@t> KaleidaHealth.org or call (716) 859-7777.

_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet