[Histonet] Shandon Hypercenter XP

[Snider, Deanna]

Shriners Hospital for Children 
Research Dept. 
Cincinnatti, Oh 
513-872-6388 

 

Hello again everyone in Histoland!

Does anyone use this processor?  I had not used it prior to accepting this
position.  What seems to be the problem is that it seems to have a lot of
carry over from station to station.  I have read the manual, did all the
maintenance it suggests, and I diligently keep up the daily routine
maintenance.  I process very small samples of clinically engineered skin.
The largest workload I have ever had here was 34 blocks.  Usually it is more
like 8- 10 cassettes.  

I just changed all the reagents yesterday, including both paraffins.  I had
a run with 4 cassettes overnight and this morning the first paraffin station
has a very strong xylene smell.  Has anyone else found this to be a problem
with this particular piece of equipment?  I don't recall having this much of
a problem with this in the VIP's or MVPs which I have worked with for the
last 15 years.  I read through the archives to see if anyone had mentioned
this and found nothing, so your comments will be greatly appreciated.

Thanks

Deanna Snider HT

 

 

CONFIDENTIALITY NOTICE:  This e-mail communication and any attachments may
contain confidential and privileged information for the use of the
designated recipients.  If you are not the intended recipient, (or
authorized to receive for the recipient) you are hereby notified that you
have received this communication in error and that any review, disclosure,
dissemination, distribution or copying of it or its contents is prohibited.
If you have received this communication in error, please destroy all copies
of this communication and any attachments and contact the sender by reply
e-mail or telephone (813) 281-0300.