[Histonet] A Few Things I learned About Cutting Thick Sections

[Featherstone, Annette]

Thanks to everyone for all the tips for cutting 20-50 micron sections!!
1. Warm blocks in water bath for a few seconds.
2. Hold down section with a brush
3. Lay section on room temp water bath first. Use a non treated slide to
transfer.
4. Lay section on 42 degree water bath and watch it uncurl!!
Annette Featherstone HT/MLT

CONFIDENTIALITY NOTICE: 
This email transmission and any documents, files, 
or previous e-mail messages attached to it are 
confidential and intended solely for the use of the 
individual or entity to whom they are addressed. 
If you are not the intended recipient, or a person 
responsible for delivering it to the intended recipient, 
you are hereby notified that any further review, 
disclosure, copying, dissemination, distribution, or 
use of any of the information contained in or attached 
to this e-mail transmission is strictly prohibited. 
If you have received this message in error, please 
notify the sender immediately by e-mail, discard 
any paper copies, and delete all electronic files 
of the message. If you are unable to contact the 
sender or you are not sure as to whether you 
are the intended recipient, please e-mail 
ISTSEC <@t> KaleidaHealth.org or call (716) 859-7777.