[Histonet] RE: Cutting paraffin sections...on a cryostat?

Connolly, Brett M brett_connolly <@t> merck.com
Fri Jun 14 15:21:52 CDT 2013


Sure it could be done - low throughput and very awkward though.  So, no other lab at the university has a microtome that they would let a fellow researcher get some time on ??? 


Brett M. Connolly, Ph.D.
Principal Scientist, Imaging Dept.
Merck & Co., Inc.
PO Box 4, WP-44K
West Point, PA 19486
brett_connolly <@t> merck.com
T- 215-652-2501
F- 215-993-6803


-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu [mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Johnson, Kevin
Sent: Friday, June 14, 2013 4:09 PM
To: 'histonet <@t> lists.utsouthwestern.edu'
Subject: [Histonet] Cutting paraffin sections...on a cryostat?

Hi, all.  A bit of an odd question: a colleague knows of someone wanting to cut paraffin sections who has a cryostat, but no microtome. Since a cryostat's basically a microtome in a freezer chamber, I thought that it may be awkward, but theoretically doable once it was brought to room temp and dried out thoroughly. However, I wondered if lubricants formulated for the cold might become too thin for use at room temp, possibly causing damage to moving parts.  Any thoughts?

Kevin Johnson
University of Miami
Diabetes Research Institute
_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
Notice:  This e-mail message, together with any attachments, contains
information of Merck & Co., Inc. (One Merck Drive, Whitehouse Station,
New Jersey, USA 08889), and/or its affiliates Direct contact information
for affiliates is available at 
http://www.merck.com/contact/contacts.html) that may be confidential,
proprietary copyrighted and/or legally privileged. It is intended solely
for the use of the individual or entity named on this message. If you are
not the intended recipient, and have received this message in error,
please notify us immediately by reply e-mail and then delete it from 
your system.




More information about the Histonet mailing list