[Histonet] RE: General Data

[Tom McNemar]

We use a  full PC mounted under the counter and a touchpad mounted on an arm that can be positioned just about anyplace.  The printer is mounted on a small shelf below the counter.  Small scanner mounted to a desktop stand that can be moved wherever the cutter wants.

Tom McNemar, HT(ASCP)
Histology Co-ordinator
Licking Memorial Health Systems
(740) 348-4163
(740) 348-4166
tmcnemar <@t> lmhealth.org
www.LMHealth.org


-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu [mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Nancy Schmitt
Sent: Thursday, February 14, 2013 11:31 AM
To: histonet <@t> lists.utsouthwestern.edu
Subject: [Histonet] General Data

Good Morning-
We are currently using General Data for cassette labeling - very happy with it.  The next phase is implementing slide labeling.
I would appreciate knowing what kind of setup people are using at the microtome - laptop? touchpad? Full computer? Is the arm off of the microtome or out from the counter?
Any and all information is appreciated!

Nancy Schmitt, HT, MLT(ASCP)
Histology Coordinator
Dubuque, IA  52001



NOTICE: This email may contain legally privileged information. The information
is for the use of only the intended recipient(s) even if addressed
incorrectly. If you are not the intended recipient, please notify the sender
that you have received it in error and then delete it along with any
attachments. Thank you.



_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet

This e-mail, including attachments, is intended for the sole use of the individual and/or entity to whom it is addressed, and contains information from Licking Memorial Health Systems which is confidential or privileged. If you are not the intended recipient, nor authorized to receive for the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this e-mail and attachments is prohibited. If you have received this in error, please advise the sender by reply e-mail and delete the message immediately. You may also contact the LMH Process Improvement Center at 740-348-4641. E-mail transmissions cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. Thank you.