[Histonet] Processing animal fat

[Sherwood, Margaret]

The specimens can be large, but we trim so the thickness is less than 5mm. 

-----Original Message-----
From: Marcum, Pamela A [mailto:PAMarcum <@t> uams.edu] 
Sent: Thursday, March 17, 2011 4:02 PM
To: Sherwood, Margaret ; histonet <@t> lists.utsouthwestern.edu
Subject: RE: Re: [Histonet] Processing animal fat

How large are your specimens?  How thick is the fat layer?  Pam Marcum

-----Original Message-----
From: histonet-bounces <@t> lists.utsouthwestern.edu
[mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Sherwood,
Margaret 
Sent: Thursday, March 17, 2011 2:57 PM
To: histonet <@t> lists.utsouthwestern.edu
Subject: Re: [Histonet] Processing animal fat

My question is directed specifically to veterinary histologists or histologists
who also do a fair amount of animal processing.  We are having a terrible time
processing pig fat.  We had problems previously, but thought we had solved them.
This latest project (pig skin with a lot of fat attached) came out awful.  The
fat was not adequately processed:  couldn't section it, it just crumbled.  In
the block, it appears white and crumbly.  The funny thing is some blocks came
out all right, but most didn't.

PLEASE help!  Let me know how you process your animal fat (sp. Pig)! Is there a
size issue (we trim it if it is greater than 5mm)?  We have gotten help from the
histonet before and instituted these suggestions (i.e. let sit in formalin for
48 hours; put in cassettes in a 60 degree oven for 1-2 hours and then cool to
room temp. Then process using a 1 hour program).

Any help would be appreciated.

Thanks!
Peggy

Peggy Sherwood
Lab Associate, Photopathology
Wellman Center for Photomedicine (EDR 214)
Massachusetts General Hospital
55 Fruit Street
Boston, MA 02114-2696
617-724-4839 (voice mail)
617-726-6983 (lab)
617-726-1206 (fax)
msherwood <@t> partners.org 




The information in this e-mail is intended only for the person to whom it is
addressed. If you believe this e-mail was sent to you in error and the e-mail
contains patient information, please contact the Partners Compliance HelpLine at
http://www.partners.org/complianceline . If the e-mail was sent to you in error
but does not contain patient information, please contact the sender and properly
dispose of the e-mail.


_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
Confidentiality Notice: This e-mail message, including any attachments,
is for the sole use of the intended recipient(s) and may contain
confidential and privileged information.  Any unauthorized review,
use, disclosure or distribution is prohibited.  If you are not the 
intended recipient, please contact the sender by reply
e-mail and destroy all copies of the original message..