[Histonet] cryostat blues

Jan.Minshew <@t> leica-microsystems.com Jan.Minshew <@t> leica-microsystems.com
Wed Oct 15 09:26:45 CDT 2008


Hello Emily,

I'm so sorry if someone told you to spray an anti-static spray into the
cryostat chamber.  That is not a recommended practice and it should not be
done.  Spraying anything into a cryochamber creates an aerosol that can
contaminate the air in the breathing zone of the operator...and we all know
what is lurking in the depths of our cryostats.

As you suggested, storing a small container of alcohol in the back of the
cryostat while sectioning (remove when finished) and grounding the blade
holder are effective and safe ways to reduce static electricity.  You can
also try placing an anti-static clothes dryer sheet in front of or behind
the knife holder.

Again, I apologize for the misinformation.  Please feel free to contact me
if I can help in any other way.

Best wishes,


Jan Minshew, HT/HTL(ASCP)
Marketing Manager
Leica Microsystems
Biosystems Division
2345 Waukegan Road
Bannockburn, IL 60015

800.248.0123 Toll Free
847.405.7051 Direct
847.405.6560 Fax

www.leica-microsystems.com

Click Here for this month's special offers!


                                                                           
             "Emily Sours"                                                 
             <talulahgosh <@t> gmai                                             
             l.com>                                                     To 
             Sent by:                  histonet <@t> lists.utsouthwestern.edu   
             histonet-bounces@                                          cc 
             lists.utsouthwest                                             
             ern.edu                                               Subject 
                                       Re: [Histonet] cryostat blues       
                                                                           
             10/15/2008 07:54                                              
             AM                                                            
                                                                           
                                                                           
                                                                           




Unfortunately, this sounds like static electricity.
Leica suggests spraying anti-static spray in the chamber (!).  You could
also ground the metal in the chamber using metal wire touching something
metal outside the chamber (the Russian post-doc solution, very clever).  We
keep 100% EtOH in a small container (about 100 ml) in the back of the
chamber to reduce static, which I learned from a long ago histonet post, so
I have no idea why it works.
Otherwise, buy an anti-static brush, which I hear exists, but have never
seen.

Emily
--
the velocity of time turns her voice into sugar water
http://www.youtube.com/watch?v=jNA6zzoObxg
_______________________________________________
Histonet mailing list
Histonet <@t> lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet



______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________



More information about the Histonet mailing list