[Histonet] microwave processors

Phil McArdle PMcArdle <@t> ebsciences.com
Fri Apr 11 09:26:40 CDT 2008


Here's a quick vendor response:

I agree with Jeff's comments; the "health-and safety" aspects of 
reducing or eliminating formalin and xylene use results in many 
benefits, and reduction of reagent consumption is a win-win. Further, I 
believe that a laboratory microwave processor, especially one that is 
not limited to a single protocol or proprietary reagents, allows 
flexibility in the lab that can't easily be quantified via TAT alone. 
And finally, I hear comments all the time like "the techs always know 
the microwaved samples - the blocks cut better" and pathologists mention 
improved staining or morphology. Given these benefits, I think it's 
reasonable to conclude pre- and post-processing TAT might actually be 
improved.

On another note, I will be leaving EBS on April 13. Anyone wishing to 
contact me may do so via my personal e-mail: mcardlepm <@t> gmail.com.

Keep up the great work, everyone!

Phil McArdle
-- 
Phil McArdle
Microwave Product Manager

Energy Beam Sciences, Inc.
29-B Kripes Rd.
East Granby, CT 06026

Tel:  800.992.9037 x 341
Mobile: 860.597.6796
Fax: 860.653.0422

You must be the change you want to see in the world.
- Mahatma Gandhi

NOTE: This message, together with any attachments, is intended only for 
the use of the individual or entity to which it is addressed and may 
contain information that is legally privileged, confidential and exempt 
from disclosure. If you are not the intended recipient, however, there's 
not a lot I can do about it, and it was probably my mistake anyway. So 
please do the right thing and make this e-mail go away. Thank you.

Jeff Birkner wrote:
> What Rene has mentioned is true.  However, we have been able to cut our reagent and paraffin usage by 80% which is a huge cost savings.  We have also been able to do away with formalin and xylene, so no more costly monitoring!
>
> Jeff Birkner, CT(ASCP)
> Pathology Section Manager
> Collaborative Laboratory Services, LLC
> 1005 Pennsylvania Ave.
> Ottumwa, IA  52501
> 641-684-4621
>  
>
> -----Original Message-----
> From: histonet-bounces <@t> lists.utsouthwestern.edu [mailto:histonet-bounces <@t> lists.utsouthwestern.edu] On Behalf Of Rene J Buesa
> Sent: Friday, April 11, 2008 8:55 AM
> To: Stephanie Weaver; histonet post
> Subject: Re: [Histonet] microwave processors
>
> IF you have a turn around time issue, it is worth considering the MW option, BUT if you are not pressured by the TAT it is NOT worth it.
>   Consider the following: NO matter how fast you process your tissues, you will need EXACTLY the same time  PRE and POST processing to take care of your 100 cassettes.
>   You probably will cut in half your processing time (since you are aiming at 3 hours processing time), so your total TAT will be about 80% of your present TAT.
>   And NO, a modified lab MW oven will not produce the same results.
>   If you want I can send you a study I published on the subject.
>   René J.
>
> Stephanie Weaver <sweaver <@t> tvmdl.tamu.edu> wrote:
>   
>  
>
>
>
>  __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around 
> http://mail.yahoo.com 
> _______________________________________________
> Histonet mailing list
> Histonet <@t> lists.utsouthwestern.edu
> http://lists.utsouthwestern.edu/mailman/listinfo/histonet
>
> _______________________________________________
> Histonet mailing list
> Histonet <@t> lists.utsouthwestern.edu
> http://lists.utsouthwestern.edu/mailman/listinfo/histonet
>   




More information about the Histonet mailing list